Motorola MT2000 用户手册

F5

MOTOROLA Radio Service Software
MTSX

Model:  

MAIN:GET/SAVE/PROG:CLONE RADIO

Select Function F1 - F10

NEW TRUNKING IDS

Serial Number .......................

System

Type I

II/IIi

Universal

Pers #

System Key

Type

#

ID

Flt/ATG

Indv ID

Indv ID

ID

01

Disabled

II

01

0001

000F

02

Disabled

IIi

01

0001

0001

03

Disabled

I

02

0001

0001

This screen is used to copy codeplug information from one radio to another one. Only radios with the same model
number may be cloned.  This screen summarizes the individual ID information for both MDC and Trunking so that
it can be changed from one convenient screen.  Conventional radios may be cloned completely. Trunking radios
may only be cloned if you have a system key for every trunking system in the codeplug.  

System keys for all Trunked Systems in the radio are required to perform a full clone. Follow the steps below for
Full Cloning procedures.

1.

Use the GET/SAVE functions to read  (F3/F2) the radio codeplug to be cloned.  That is the “source”
codeplug. An archive file may also be used as the “source” codeplug.

2.

Enter the serial number of the radio to be cloned on the TRUNKED CLONING screen, or press F2 to read the
serial number from the connected radio.  System keys are required to change the serial number.

3.

Change the trunking individual IDs to those required by the new radio on this screen. If MDC IDs are used
also, they can be changed on the MDC ID screen by pressing  F3.

4.

Connect the “target” radio to the computer, and press the F8 function key to program the “source” codeplug
into the “target” radio.

1.

Press F3 at the MAIN MENU. The GET/SAVE/PROGRAM MENU appears.

2.

Press F5. The TRUNKED CLONING screen appears.

3.

Select the desired function key (F1 - F10).