Motorola MT2000 用户手册

Before we can program the MT2000 radio with some features we must read and access the current radio's
personality (codeplug data).

Press F3 at the MAIN MENU to get to the
GET/SAVE Menu.

At the GET/SAVE menu, press F2 to execute the
function.  You will also see an indication of how
much of the radio codeplug has been read.

1.

Go to GET/SAVE menu

2. Get current radio's codeplug

data

After the MT2000 radio's codeplug data is read, the RSS allows us to access the CHANGE/VIEW menu.  From
here we can program the features we want on each channel, and the ones we want common to all channels.
First we'll program the common (radio-wide) features.  Note that some screens are not accessed, leaving many
parameters at factory default values, which are suitable in most cases.

(Press Esc to back up to MAIN MENU.)  Press F4
at the MAIN MENU to see the CHANGE/VIEW
Menu.

At the CHANGE/VIEW menu, press F3 to see the
Radio Wide Configuration Menu.

Press F3 to see Radio Wide Features Configuration
Menu.

Press F3 to see Radio Wide Switch Configuration
Screen.  The two position concentric switch
(Conventional Feature) will be highlighted

Press up/down arrow keys to select Scan for
Position A, and Blank for position B

NOTE: We will assume that the factory defaults are
suitable for remaining controls.

Press F10 twice to see Radio Wide Configuration
menu.

Press F5. Scan Type - Conventional will be
highlighted, press Tab until Scan List is highlighted

Press F2.  Scan List members will be added after
the Zone/Channel screen has been completed.

Press F10 to return to Radio Wide Configuration
Menu.

1. Go to CHANGE/VIEW menu

2. Go to Radio-Wide

Configuration Menu

3. Go to Radio Wide Features

Configuration Menu

4. Go to Radio Wide Switch

Configuration screen

5. Select Scan

6. Exit to Radio Wide

Configuration Menu

7. Go to Scan Lists and Options

8. Add a second Scan List

9. Exit to Radio Wide

Configuration Menu