Motorola MT2000 用户手册

Press Esc to back up to MAIN MENU.

Press F10 then F2 to exit to DOS.

1.

Go to MAIN MENU menu.

2.

Exit to DOS

To clone (copy) radios, they must be of the same model type and version.  Cloning applies predominately to
conventional-only radios.  To clone trunked radios, you are required to have a system key for each of the trunked
systems programmed into the source radio on file.  Most organizations that program trunked radios will not have
access to these keys.  The process for cloning conventional and trunked radios, however, is the same.

The desired features are the exact same ones listed in the first tutorial, section 3.2.1

The major steps for cloning in this tutorial are reduced from six steps in the first tutorial to two steps here.

To program the cloned radio, the approach will be:

a.  Pick desired archive file
b.  Decide how many radios to clone

In following section you will:

a.  Read into the RSS the specific archive file you want to clone,
b.  Actually clone that source file into the current (target) radio's codeplug,
c.  Clone the remaining radios the same way, and then
d.  Exit the RSS.