Motorola RMV2080 用户手册

English

Default value is OFF. If you want to use the 
VOX feature, VOX level should be set at a 
different level.

•

1 = High audio input level will trigger the Tx

•

2 = Medium sensitivity

•

3 = Low audio input level will trigger the Tx

The sensitivity of the microphone can be 
adjusted to fit different users or operating 
environments.

This feature can be adjusted only through the 
CPS. Microphone default setting is set to level 
2 (medium gain).

•

Enable iVOX by pressing the PTT Button while 
turning ON the radio.

•

A short press of the PTT Button re-enables iVOX.

•

There is a short delay between the time when you 
start talking and when the radio transmits.

Short press the SB1 Button while turning ON 
the radio to enable/disable the Voice Prompt in 
User Mode. (Default is set to ON).

This setting is set to OFF by default and 
must be enabled using the CPS.

To enable/disable power up tone mode, press 
SB1 and SB2 buttons simultaneously for 2-3 
seconds while powering up the radio until you 
hear the pre-programmed power up tone. 3 
different power-up tones are available.

Reset to Factory Defaults will set back all radio 
features to the original factory default settings. 
To do so, press PTT, SB2 and SB1 
simultaneously while turning ON the radio until 
you hear a high tone chirp.