Motorola MWR839 用户手册
11
Model: MWR839
12
Model: MWR839
Maintaining Clock Time Automatically using RBDS CT
To automatically maintain the correct time on your Motorola MWR839
Weather Alert Radio without manual operation:
To automatically maintain the correct time on your Motorola MWR839
Weather Alert Radio without manual operation:
1. Press the MENU button.
2. Press TUNE DOWN to scroll down to the Clock menu.
3. Press TUNE DOWN to scroll down to Automatic.
4. Press the VOL UP button to turn the Automatic function ON.
5. Press SELECT.
6. Press TUNE DOWN to scroll and SELECT to choose Station 1,
Station 2 or Station 3.
7. Press any PRESET station or use TUNE UP/DOWN to set the radio
to a FM station as the source of the radio CT data.
8. Press ON/OFF to put the radio in standby mode.
The radio will synchronize the clock time according to your settings of
these three stations every two hours. The icon will appear on the LCD
display when the radio clock is synchronized with CT.
these three stations every two hours. The icon will appear on the LCD
display when the radio clock is synchronized with CT.
Note:
The CT function can only be operated manually, when the
Automatic feature is turned off.
The CT function can only be operated manually, when the
Automatic feature is turned off.
Listening to Weather Broadcast
1. Press the MENU button and press the TUNE DOWN to scroll down
to Weather Channel, and press the SELECT button to enter the menu.
The LCD display will show the channel number. Press TUNE UP/DOWN
to select the channel that corresponds with the NOAA
website listing. Press the SELECT button to save the
Channel Setting and return to the main menu list.
1. Press the MENU button and press the TUNE DOWN to scroll down
to Weather Channel, and press the SELECT button to enter the menu.
The LCD display will show the channel number. Press TUNE UP/DOWN
to select the channel that corresponds with the NOAA
website listing. Press the SELECT button to save the
Channel Setting and return to the main menu list.
2. Switch the Weather Alert ON/OFF to put the weather receiver into
alert mode. Press the WEATHER BAND button to hear the voice
broadcast.
broadcast.
Place the radio where it gets the best reception. Adjust the
orientation and length of the antenna for the best reception. The
LCD display willshow the specified weather channel number in the
upper right handcorner when the weather / hazard receiver is in
alert mode.
orientation and length of the antenna for the best reception. The
LCD display willshow the specified weather channel number in the
upper right handcorner when the weather / hazard receiver is in
alert mode.
To turn off the weather channel press the WEATHER BAND button
again.Your radio can be further programmed to respond to alerts in
specific areas. To custom program your radio for alerts in your area
only, see the SAME programming instructions on page 11-12.
again.Your radio can be further programmed to respond to alerts in
specific areas. To custom program your radio for alerts in your area
only, see the SAME programming instructions on page 11-12.