Motorola XPR 6380 用户手册

下载
页码 42
Receiving and Making Calls
English
15
Talkaround
NOTE: This is a conventional only feature.
You can continue to communicate when your repeater is not 
operating, or when your radio is out of the repeater’s range but 
within talking range of other radios. This is called “talkaround”.
Procedure: 
1
Press the programmed Repeater/Talkaround button.
2
You hear a positive indicator tone, indicating the radio is in 
Talkaround mode.
OR
You hear a negative indicator tone, indicating the radio is in 
Repeater mode.
The Talkaround setting is retained even after powering down.
Monitoring Features
NOTE: This is a conventional only feature.
Monitoring a Channel
Use the Monitor feature to make sure a channel is free before 
transmitting.
Procedure:
1
Press and hold the programmed Monitor button and listen 
for activity.
2
You hear radio activity or total silence, depending on how 
your radio is programmed.
3
When you hear “white noise” (that is, the channel is free), 
press the PTT button to talk and release it to listen. The LED 
lights up solid yellow.
Permanent Monitor
Use the Permanent Monitor feature to continuously monitor a 
selected channel for activity.
Procedure:
1
Press the programmed Permanent Monitor button.
2
Radio sounds alert tone, and the LED lights up solid yellow.
3
Press the programmed Permanent Monitor button to 
remove the radio from permanent monitor mode.
4
Radio sounds an alert tone and the LED turns off.
NAG-LACR.book  Page 15  Monday, October 26, 2009  3:03 PM