Motorola T7200 用户手册

Note:  Obstacles that block the signal path affect the strength of the incoming signal.

“Roger” Beeps/Talk Confirmation Tone
When you turn this feature On, your two-way radio transmits a unique tone when you 
finish transmitting. It’s like saying “Roger” or “Over” and lets others know you’re 
finished talking. If the person you are talking to does not hear the talk confirmation 
tone, you can enable it by pressing and holding 

]

 as you turn On your radio. Now, 

whenever you release 

M

, you let your friends know you’re finished talking by 

transmitting a “Roger” Beep tone. “Roger” Beeps will be disabled as the 
Default Setting.
Note:  To toggle the Talk Confirmation Tone feature, turn your radio Off and then 

back On while pressing and holding 

]

.

Button Beeps
Every time you press a button on the front of your radio, it beeps unless you turn 
Button Beeps Off. To turn Button Beeps Off, turn your radio On while you press and 
hold 

[

. To turn Button Beeps back On, turn the radio Off and then back On again 

while you press and hold 

[

. Button Beeps will be turned On, out of the factory. On 

is the Default setting.

The w helps you determine when a radio is moving out of range 
by displaying a receive signal-strength value next to the w while 
you press and hold 

J

. This value from 

0

 (weakest) through 

6

 

(strongest) indicates the relative strength of the incoming signal.

6864110R94.book  Page 22  Friday, February 8, 2002  2:34 PM