Motorola SL300 用户手册

2 Press the PTT button during hang time.

The LED lights up solid green.

3 Release the PTT button to listen.

If you do not respond within the hang time, the
radio returns to scanning other channels/groups.

If a channel continually generates unwanted calls or
noise (termed a “nuisance” channel), you can
temporarily remove the unwanted channel from the
scan list.

This capability does not apply to the channel
designated as the Selected Channel.

1 When your radio “locks on to” an unwanted or

nuisance channel, press the programmed
Nuisance Channel Delete button until you hear a
tone.

2 Release the Nuisance Channel Delete button.

The nuisance channel is deleted.

To restore the deleted nuisance channel, do one of
the following:

• Turn the radio off and then power it on again.
• Stop and restart a scan via the programmed Scan

button.

• Change the channel via the Channel Selector

Switch.

Vote Scan provides you with wide area coverage in
areas where there are multiple base stations
transmitting identical information on different analog
channels.

Your radio scans analog channels of multiple base
stations and performs a voting process to select the
strongest received signal. Once that is established,
your radio unmutes to transmissions from that base
station.

The LED blinks yellow during the Vote Scan
operation.

Advanced Features

English