Motorola RMU2080 用户手册

English

are 7 received frequencies available for this 
feature.

Before configuring the features, make sure 
your radio is set to the channel you wish to 
program. You can do so before entering 
Advanced Configuration Mode or at any 
time during the Advanced Configuration 
Mode by rotating the Channel Selector Knob 
until you reach the desired channel.

To read or modify Frequencies, Codes, Auto-
Scan, Active Channels and Weather Channel 
set the radio to ‘Advanced Configuration Mode’ 
by long pressing both the PTT and the SB1 
button simultaneously for 3 to 5 seconds while 
turning ON the radio until you hear an audible 
voice saying “Programming Mode” and 
“Channel Number”. The LED Indicator starts 
blinking a green heartbeat.

‘Idle’ Programming Mode is the stage in the 
Programming Mode where the radio waits 

for the user to start the radio programming 
cycle.

Once you are in the ‘Idle’ Programming Mode, 
you will be able to hear the Frequencies, 
Codes, Auto-Scan, Active Channels and 
Weather Channel settings by short pressing 
the PTT button to navigate along the different 
programmable features.

RM Series radios have 89 frequencies for UHF 
and 27 frequencies for VHF.

In ‘Idle’ Programming mode, the Channel 
number becomes the first changeable value. 
Select the desired channel by turning the 
Channel Selector Knob. An audible voice 
indicated the selected channel to configure. 
Short pressing the PTT button allows you to 
cycle through the other features available for 
configuration. Use the SB1 and SB2 button to 
change the values. An audible voice indicates 
the value selected.