Motorola RMU2080 用户手册

English

Scan allows you to monitor other channels to 
detect conversations. When the radio detects a 
transmission, it stops scanning and goes to the 
active channel. This allows you to listen and 
talk to people in that channel without having to 
change channel manually. If there are 
transmissions on another channel, you will not 
hear that activity once the radio has stopped 
scanning. Once the activity on transmitting 
channel stops, the radio waits for 5 seconds 
before resuming scan again.

•

To start scanning, press the SB1 or SB2 button

Scan has to be programmed either to SB1 
or SB2 button via CPS. SB2 is by default 
Scan/Nuisance Channel delete button.

•

To stop scanning, short press the SB1 or SB2 
button (programmed for scan) again.

•

By pressing the PTT button while the radio is 
scanning, the radio will transmit on the channel 
which was previously selected before Scan is 

activated. If no transmission occurs within 5 
seconds, scanning resumes.

•

If you want to scan a channel without the 
Interference Eliminator Codes (CTCSS/DPL), set 
the code settings for the channels to ‘0’ in the 
CTCSS/DPL Programming Selection Mode.

Whenever the radio is set to Scan, the LED 
Indicator blinks a Red Heartbeat.

Scan List can be edited by using the CPS. For 
more information refer to “Customer 
Programming Software (CPS)” on page 41.