Motorola RMU2080 用户手册

English

(cloning is successful) or “fail” (cloning process 
has failed). If the Source Radio is a display 
model radio, it will either show ‘Pass’ or ‘Fail’ on 
the display (a voice announcement will be 
played within 5 seconds).

Once the cloning process is completed, turn the 

Radios OFF and ON or, long press the PTT 
button to exit the ‘cloning’ mode

The radio audible voice will announce “Fail” 
indicating that the cloning process has failed. In 
the event that the cloning fails, perform each of 
the following steps before attempting to start 
cloning process again:

Ensure that the batteries on both radios are fully 

charged.

Check the cloning cable connection on both 

SUCs.

Ensure that the battery is engaged properly on 

the radio.

Ensure that there is no debris in the charging 

tray or on the radio contacts.

Ensure that the Target radio is turned ON.

Ensure that the Source radio is in cloning mode.

Ensure that the two radios are both from the 

same frequency band, same region and have 
the same transmission power.

This cloning cable is designed to operate 
only with compatible Motorola SUC 
RLN6175 and PMLN6394.

When ordering Cloning Cable, please refer to 
P/N# HKKN4028_. For more information about 
the accessories, refer to “Accessories” on 
page 74.