Motorola XU2100 用户手册

下载
页码 35
51
X
Verifying the M-Series Frequency and Code Setting
The XSeries Two-Way radio replaces the Spirit M-Series radio. The factory 
default settings for both radios are identical. However, existing radios may have been 
programmed to different settings. To program your XSeries radio to talk with an 
M-Series radio, verify or change your M-Series settings as follows.
1. Press and hold M while you turn on the radio to enter programming mode.
The radio announces current frequency for that channel. For example: “frequency one.” 
2.  If desired, press M to scroll through the frequencies.
The radio announces each frequency as you scroll. For example: “two...three...”
3.  Release M when you reach the desired frequency.
4.  Press Q to select and save the frequency setting.
The radio announces current code setting. For example: “code two nine”
5.  Press M to scroll through the codes.
The radio announces each code as you scroll. For example: “three zero...three one”
6.  Release M when you reach the desired code.
7.  Press Q to select and save the code setting.
Mo
tor
ola Lim
ited W
a
rranty
52
Motorola Limited Warranty
for the United States and Canada
What Does this Warranty Cover?
Subject to the exclusions contained below, Motorola, Inc. warrants its telephones, 
pagers, and consumer and professional two-way radios (excluding commercial, 
government or industrial radios) that operate via Family Radio Service or General 
Mobile Radio Service, Motorola-branded or certified accessories sold for use with 
these Products (“Accessories”) and Motorola software contained on CD-ROMs or 
other tangible media and sold for use with these Products (“Software”) to be free from 
defects in materials and workmanship under normal consumer usage for the 
period(s) outlined below. This limited warranty is a consumer's exclusive remedy, 
and applies as follows to new Motorola Products, Accessories and Software 
purchased by consumers in the United States or Canada, which are accompanied by 
this written warranty: