Motorola XTS 3000 用户手册

Place the Scan On/Off Switch (if programmed, see 
page 2) in the “scan on” position or the “scan off” 
position.

When the radio scans to a channel that you do not wish to hear (nuisance 
channel), you can temporarily delete the channel from the scan list. 

1.

When the radio is locked onto the channel to be 
deleted, press the Nuisance-Delete Button (if 
programmed, see page 2). Repeat this step to delete 
additional nuisance channels.

Priority channels and the selected channel 

cannot be deleted using the nuisance-
delete feature.

2.

The radio continues scanning the remaining 
channels in the list. To resume scanning the 
deleted channel, you can change channels or leave 
and re-enter scan operation.

While the radio is scanning, the dynamic priority change feature lets you 
temporarily change any channel in a scan list (except the priority-one 
channel) to the priority-two channel. The present priority-two channel 
becomes a non-priority channel. This change remains in effect until scan is 
turned off, then scanning reverts back to the preprogrammed state.

1.

When the radio is locked onto the channel to be designated as priority-
two, press the Dynamic Priority Button (if programmed, see page 2).

The priority-one channel cannot be changed to priority-two.

2.

The radio continues scanning the remaining channels in the list. To 
resume scanning the preprogrammed priority-two channel, you must 
leave and re-enter scan operation.

Model I Book  Page 23  Wednesday, August 14, 1996  8:51 AM