Motorola RMU2080D 用户手册

English

To program, connect the RM Series radio via 
the Drop-in Charger Tray and CPS 
Programming Cable as shown in Figure 1 on 
page 46. Toggle the cable switch of the CPS 
Programming Cable to ‘CPS Mode’.

CPS allows you to program frequencies, PL/
DPL Codes as well as other features such as: 
Bandwidth Select, Time-out Timer, Power 
Select, Scan List, Call Tones, Scramble, 
Reverse Burst, etc. CPS is a very useful tool as 
it can also lock the Front-Panel Radio 
Programming or restrict any specific radio 
feature to be changed (to avoid accidentally 
erasing the preset radio values). It also 
provides security by giving the option to set up 
a password for profile radio’s management. For 
more information, refer to Features Summary 
Chart Section at the end of the User Guide.

(*) CPS Programming Cable P/N# 
HKKN4027_ is an accessory sold 
separately. Please contact your Motorola 
point of purchase for more information.

Transmissions can be terminated when the 
PTT button is pressed by setting up a Time-Out 
Timer.

Power Select allows you to select between 
high and low transmission power per frequency 
in each channel. The power levels for RM 
Series 2W toggle between 1W and 2W. 

Some frequencies may have FCC transmit 
power restrictions that disallow them to be 
set at a higher power level. For more 
information, refer to the “Frequency and 
Code Charts” on page 62

See “Programming Call Tones” on page 40.