Motorola XTNi Series 用户手册

•

Programmable Button

Default set to generate the current 
programmed call tone.

•

Programmable Button

Default set to preset channel 1

•

Programmable Button

Default set to preset channel 2

Note: A short press of either preset button (B or C) 

tunes the radio to the preset channel and the 
radio will play a good chirp. You can assign 
different functions to these buttons via the 
CPS. For example: Backlight Time Out, 
Reverse Burst, Power Select, Scan/
Nuisance Channel Delete, Monitor and Call 
Tones. To learn more about how to program 
these buttons refer to “Entering 
Programming Mode” on page 38 and “CPS 

• Push-to-Talk (PTT) Button

Press and hold down this button to talk, 
release it to listen.

• Side Button 1 (SB1)

The Side Button 1 is a general button that can 
be configured by the CPS. The default setting 
of the SB1 button is "Monitor".

• Side Button 2 (SB2)

The Side Button 2 is a general button that can 
be configured by the CPS. The SB2 button 
default setting is ‘Scan/Nuisance Channel 
Delete’.

XTNi™ Series provides different types of 
batteries. For more information, see “Battery 
Features and Charging Options” on page 12.

 

B 

C