Motorola XTNi Series 用户手册

Message not transmitted/ 
received

Confirm radios have the same Channel, Frequency, Interference 
Eliminator Code and Scramble Code settings. Recharge, replace 
and/or reposition batteries. Refer to ""About the Li-Ion Battery" on 
page 12. Obstructions and operating indoors, or in vehicles, may 
interfere: change location. Refer to "Talking and Monitoring" on 
page 27. Verify that the radio is not in Scan mode. Refer to 
"Programming Scan List" on page 44 and "Nuisance Channel 
Delete" on page 47.

Heavy static or interference

Radios are too close, they must be at least five feet apart. Radios 
are too far apart or obstacles are interfering with transmission. 
Refer to "Talking and Monitoring" on page 27.

Low batteries

Recharge or replace Li-Ion battery. Replace AA batteries. Extreme 
operating temperatures affect battery life. Refer to "About the Li-Ion 
Battery" on page 12.

Drop-in Charger LED light 
does not come on

Check radio/battery is properly inserted and check battery/charger 
contacts to be sure they are clean and charging pin is inserted 
correctly. Refer to "Charging the Battery" on page 19, "Drop-in Tray 
Charger LED Indicators" on page 23 and "Installing the Lithium-Ion 
(Li-Ion) Battery" on page 14.

Low battery LED blinking 
although new batteries are 
installed

Verify that the radio is set to the correct battery type. Refer to 
"Installing the Lithium-Ion (Li-Ion) Battery" on page 14, "Installing 
Alkaline Battery" on page 15 and "About the Li-Ion Battery" on page 
12.