Motorola HT1250LS+ 用户手册
72
English
PHONE
MAKING A PHONE CALL D
THROUGH A CONVENTIONAL
SYSTEM
THROUGH A CONVENTIONAL
SYSTEM
To initiate a Phone Call:
Press the preprogrammed Phone button, and
skip to step 5.
skip to step 5.
–or–
Press the PTT button, and if the Hot keypad
feature has been programmed by your dealer,
do the following:
feature has been programmed by your dealer,
do the following:
5
Press and Release the PTT button.
•
If phone access is successful, a dial tone
sounds.
sounds.
•
If phone access is unsuccessful, a
low-pitched alternating tone sounds.
Disconnect the call (see step 8) and try
again.
low-pitched alternating tone sounds.
Disconnect the call (see step 8) and try
again.
6
Enter the phone number with the keypad. The
number is automatically sent without pressing
the PTT button again.
–or–
number is automatically sent without pressing
the PTT button again.
–or–
+
or
?
to
select a number from
the phone list.
the phone list.
7
Press and release the PTT button again to
send the number.
send the number.
8
Hold your radio in a vertical position with the
microphone 1 to 2 inches (2.5 to 5
centimeters) away from your mouth. Press the
PTT button to talk; release it to listen.
microphone 1 to 2 inches (2.5 to 5
centimeters) away from your mouth. Press the
PTT button to talk; release it to listen.
9
Press and hold
(
to disconnect the call
and exit Phone mode.
The display no longer shows
D
.
XXX-XXX-XXXX
1
Select a Conventional zone and channel that
have been programmed for telephone.
have been programmed for telephone.
2
)
to enter Menu mode.
3
+
or
?
until
4
)
to select
The display shows
D
when you are in Phone
Mode.
Phone
Phone