Motorola XPR 6350 用户手册
Prep
aring Y
o
ur Radio for Use
English
4
Attaching the Belt Clip
Align the grooves on the clip
with those on the battery and
press downward until you
hear a click.
with those on the battery and
press downward until you
hear a click.
To remove the clip, press the
belt clip tab away from the
battery using a key. Then
slide the clip upward and
away from the radio.
belt clip tab away from the
battery using a key. Then
slide the clip upward and
away from the radio.
Attaching the Universal Connector Cover
(Dust Cover)
The universal connector is located on the antenna side of the
radio. It is used to connect MOTOTRBO accessories to the
radio.
radio. It is used to connect MOTOTRBO accessories to the
radio.
Place the universal connector
cover loop over the attached
antenna. Slide it all the way
down to the base of the
antenna.
cover loop over the attached
antenna. Slide it all the way
down to the base of the
antenna.
Insert the hooked end of the
cover into the slots above the
universal connector. Press
downward on the cover to
seat the lower tab properly
into the RF connector.
cover into the slots above the
universal connector. Press
downward on the cover to
seat the lower tab properly
into the RF connector.
Turn the thumbscrew clockwise to secure the connector cover
to the radio.
to the radio.
To remove the universal connector cover, press down on the
cover and turn the thumbscrew counterclockwise. Lift the cover
up, slide the connector cover loop upwards, and remove it from
the attached antenna.
cover and turn the thumbscrew counterclockwise. Lift the cover
up, slide the connector cover loop upwards, and remove it from
the attached antenna.
Replace the dust cover when the universal connector is not in
use.
use.
Universal
Connector
Cover
(Dust Cover)
Connector
Cover
(Dust Cover)