Motorola xpr6350 用户手册

下载
页码 48
Prep
aring Y
o
ur Radio for Use
English
3
To remove the 
battery, turn the 
radio off. Move the 
battery latch into 
unlock position 
and hold, and slide 
the battery down 
and off the rails.
Attaching the Antenna
With the radio turned off, set the 
antenna in its receptacle and turn 
clockwise.
To remove the antenna, turn the 
antenna counterclockwise. Make sure 
you turn off the radio and remove the 
universal connector cover first.
Attaching the Belt Clip
Align the grooves on the clip with those 
on the battery and press downward until 
you hear a click.
To remove the clip, press the belt clip 
tab away from the battery using a key. 
Then slide the clip upward and away 
from the radio.
Attaching the Universal Connector Cover
The universal connector is located on the antenna side of the 
radio. It is used to connect MOTOTRBO accessories to the 
radio.
Place the universal 
connector cover loop over 
the attached antenna. Slide 
it all the way down to the 
base of the antenna. 
Insert the hooked end of the 
cover into the slots above 
the universal connector. 
If antenna needs to be replaced, ensure that only 
MOTOTRBO antennas are used. Neglecting this will 
damage your radio. See Antennas on page 25 for a 
list of available antennas.
Battery Latch
!
C a u t i o n
Universal
Connector
Cover
NAG-LACR-EMEA.book  Page 3  Wednesday, April 30, 2008  5:11 PM