Motorola xpr6350 用户手册
Receiving and Making Calls
English
12
6
If there is no voice activity for a predetermined period of
time, the call ends.
time, the call ends.
7
You hear a short tone.
Receiving an All Call
An All Call is a call from an individual radio to every radio on the
channel. It is used to make important announcements requiring
the user’s full attention.
channel. It is used to make important announcements requiring
the user’s full attention.
Procedure:
When you receive an All Call:
When you receive an All Call:
1
A tone sounds and the LED blinks green.
2
If there is no voice activity for a predetermined period of
time, the All Call ends.
time, the All Call ends.
If the Channel Free Indication feature is enabled, you
will hear a short alert tone the moment the transmitting radio
releases the PTT button, indicating the channel is now
available for use.
releases the PTT button, indicating the channel is now
available for use.
You cannot respond to an All Call.
NOTE: The radio stops receiving the All Call if you switch to a
NOTE: The radio stops receiving the All Call if you switch to a
different channel while receiving the call.
During an All Call, you will not be able to use any
programmed button functions until the call ends.
During an All Call, you will not be able to use any
programmed button functions until the call ends.
Making a Radio Call
You can select a channel, subscriber ID or group ID by using:
•
The Channel Selector Knob
•
A programmed One Touch Call button
NOTE: Your radio must have the Privacy feature enabled on
the channel to send a privacy-enabled transmission.
Only target radios with the same Privacy Key as your
radio will be able to unscramble the transmission.
Only target radios with the same Privacy Key as your
radio will be able to unscramble the transmission.
See Privacy on page 22 for more information.
Making a Call with the Channel Selector Knob
Making a Group Call
To make a call to a group of users, your radio must be
configured as part of that group.
configured as part of that group.
Procedure:
1
Turn the Channel Selector Knob to select the channel with
the active group ID.
the active group ID.
2
Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
your mouth.
NAG-LACR-EMEA.book Page 12 Wednesday, April 30, 2008 5:11 PM