Motorola XPR 7350 用户手册
Prep
aring Y
o
ur Radio for Use
English
4
Attaching the Belt Clip
Align the grooves on the clip
with those on the battery and
press downward until you
hear a click.
with those on the battery and
press downward until you
hear a click.
To remove the clip, press the
belt clip tab away from the
battery using a key. Then
slide the clip upward and
away from the radio.
belt clip tab away from the
battery using a key. Then
slide the clip upward and
away from the radio.
Attaching the Universal Connector Cover
(Dust Cover)
The universal connector is located on the antenna side of the
radio. It is used to connect MOTOTRBO accessories to the
radio.
radio. It is used to connect MOTOTRBO accessories to the
radio.
Insert the hooked end of the
cover into the slots above the
universal connector. Press
downward on the cover to
seat the lower tab properly
into the RF connector.
cover into the slots above the
universal connector. Press
downward on the cover to
seat the lower tab properly
into the RF connector.
Turn the thumbscrew
clockwise to secure the
connector cover to the radio.
clockwise to secure the
connector cover to the radio.
To remove the universal
connector cover, press down
connector cover, press down
on the cover and turn the thumbscrew counterclockwise.
Replace the dust cover when the universal connector is not in
use.
use.
Universal
Connector
Connector