Motorola XPR 7350 用户手册

Press the PTT button during hang time. The LED lights up 
solid green.

Wait for the Talk Permit Tone to finish (if enabled) and speak 
clearly into the microphone.
OR

 Wait for the PTT Sidetone to finish (if enabled) and 

speak clearly into the microphone.

Release the PTT button to listen.

If you do not respond within the hang time, the radio returns 
to scanning other channels/groups.

If a channel continually generates unwanted calls or noise 
(termed a “nuisance” channel), you can temporarily remove the 
unwanted channel from the scan list.

This capability does not apply to the channel designated as the 
Selected Channel.

When your radio “locks on to” an unwanted or nuisance 
channel, press the programmed Nuisance Channel Delete 
button until you hear a tone.

Release the Nuisance Channel Delete button. The 
nuisance channel is deleted.

Procedure: 
To restore the deleted nuisance channel, do one of the 
following:

Turn the radio off and power it on again, OR

Stop and restart a scan via the programmed Scan button, OR

Change the channel via the Channel Selector Knob.

Vote Scan provides you with wide area coverage in areas where 
there are multiple base stations transmitting identical 
information on different analog channels.

Your radio scans analog channels of multiple base stations and 
performs a voting process to select the strongest received 
signal. Once that is established, your radio unmutes to 
transmissions from that base station. 

The LED blinks yellow during the Vote Scan operation.