Motorola XPR 7350 用户手册

NOTE:  This feature is only applicable to the radio sending the 

Emergency Alarm.

There are two instances where this can happen:

You change the channel while the radio is in Emergency 
mode. This exits the Emergency mode. If Emergency Alarm is 

enabled on this new channel, the radio reinitiates Emergency.

You press the programmed Emergency On button during an 
Emergency initiation/transmission state. This causes the 

radio to exit this state, and to reinitiate Emergency.

NOTE:  This feature is only applicable to the radio sending the 

Emergency Alarm.

Your radio exits Emergency mode when one of the following 
occurs:

Emergency Alarm acknowledgement is received (for 
Emergency Alarm only), OR

An Emergency Exit Telegram is received, OR

All retries to send the alarm have been exhausted, OR

The Emergency Off button is pressed.

NOTE:  If your radio is powered off, it exits the Emergency 

mode. The radio does not reinitiate the Emergency 
mode automatically when it is turned on again.

You can send Quick Text messages, programmed by your 
dealer, via the programmable button.

Press the programmed One Touch Access button to send 
a predefined Quick Text message to a predefined ID.

The LED lights up solid green.

Two chirps indicate that the message is sent successfully.
OR
A low-pitched tone indicates that the message cannot be 
sent.