Motorola 4550 用户手册
Advanced Features
English
24
OR
If unsuccessful:
The radio repeats the attempt until the programmed number
of tries expires.
If unsuccessful:
The radio repeats the attempt until the programmed number
of tries expires.
You can also manually select a target radio address (see
Initiating Remote Monitor by Manual Dial on page 66).
Initiating Remote Monitor by Manual Dial on page 66).
Stopping Remote Monitor
Procedure:
1
Press the programmed Transmit Interrupt Remote Dekey
button.
button.
2
The display shows Remote Dekey.
3
Wait for acknowledgment.
4
The radio sounds a positive indicator tone and the display
shows Remote Dekey Success, indicating that the channel
is now free.
OR
The radio sounds a negative indicator tone and the display
shows Remote Dekey Failed.
shows Remote Dekey Success, indicating that the channel
is now free.
OR
The radio sounds a negative indicator tone and the display
shows Remote Dekey Failed.
Scan Lists
Scan lists are created and assigned to individual channels/
groups. Your radio scans for voice activity by cycling through the
channel/group sequence specified in the scan list for the current
channel/group.
groups. Your radio scans for voice activity by cycling through the
channel/group sequence specified in the scan list for the current
channel/group.
Your radio can support up to 250 scan lists, with a maximum of
16 members in a list. Each scan list supports a mixture of both
analog and digital entries.
16 members in a list. Each scan list supports a mixture of both
analog and digital entries.
You can add, delete, or prioritize channels by editing a scan list.
NOTE: This feature is not applicable in Capacity Plus.
Viewing an Entry in the Scan List
Procedure:
1
S
to access the menu.
2
P
or
Q
to Scan and press
N
to select.
3
P
or
Q
to View/Edit List and press
N
to select.
4
Use
P
or
Q
to view each member on the list.
The priority icon appears left of the member’s alias, if set, to
indicate whether the member is on a Priority 1 or Priority 2
channel list. You cannot have multiple Priority 1 or Priority 2
channels in a scan list.
indicate whether the member is on a Priority 1 or Priority 2
channel list. You cannot have multiple Priority 1 or Priority 2
channels in a scan list.
There is no priority icon if priority is set to None.
NAG_6880309T15.book Page 24 Tuesday, March 9, 2010 11:47 AM