Motorola rdm2080d 用户手册

This feature sends an alert notification to other 
radios in the fleet prior to the transmission with 
the intent to grab the receiver’s attention so the 
transmission is not missed.
In order to configure this feature via the front 
panel, it must first be enabled via the CPS.
To configure call tones:

Enter “Advanced Configuration Mode” and 

scroll through the menu options until the screen 
shows the image below:

The current call tone setting will be blinking. A 
call tone value (0,1,2 or 3) must be selected by 

pressing the 

/

 buttons. The call tone will 

pre-play before being selected.

Long press the PTT button to save and exit,

 --or-- short press the PTT button to configure 
the next feature without saving.

The sensitivity of the microphone can be 
adjusted in both the radio’s microphone and 
the accessory’s microphone to fit different 
users or operating environments. 
The Gain determines the microphone’s 
transmitted audio volume level for the receiving 
radio’s speaker.
To configure microphone gain level:

Enter “Advanced Configuration Mode” and 

scroll through the options by short pressing the 
PTT button until the screen shows the image 
below: 

The current microphone gain level setting will 
blink. 

 

TONE

 

 

 

 

IMIC