Motorola CLP1060 用户手册

You can copy the CLP Series radio settings from 
one radio (the source) to a second radio using the 
CLP Series Single Unit Charger (SUC) Kit P/N 
HKPN4008 and CLP Series Cloning Cable Kit P/N 
HKKN4026 (optional accessory) or CLP Series 
Multi-Unit Charger (MUC) Kit P/N HKPN4007 
(optional accessory). 

A multi-channel radio can be cloned to a single-
channel radio BUT only the first channel is cloned. 
The Multi-Unit Charger (MUC) does not have to be 
plugged in for cloning, but both radios require 
charged batteries. 

The enhanced CLP software also uses the 
LED to indicate “pass” or “fail” status during 
cloning. Green LED during cloning indicates 
“pass” status and red LED during cloning 
indicates “fail” status.

Source Radio: Radio to be cloned
Target Radio: Radio to which the configuration of the 

“Source Radio” is to be copied.

Before beginning the cloning process, make
sure you have:
• A fully charged battery on each one of the
radios
• Two CLP Series Single Unit Charger (SUC) Kits 
• Both radios are turned OFF

1.

Unplug any cables (power supply or USB 
cables) from the Single Unit Chargers.