Golden Technologies Companion II 用户手册

Companion 

27

The  diagnostics  feature  of  your  Golden 
Companion’s  “Rhino”  microprocessor-
based motor control board functions as 
follows:
•  Any  fault  condition  on  the  “Rhino” 

controller or on an associated system 
will  cause  the  Power-on/diagnostics 
LED (see figure 43) to flash.

•  The flashing of the LED occurs as one 

flash or as a series of flashes separated 
by a two-second pause.

•  The number of flashes in each series 

is referred to as the “Flash Code.”

•  The flash code indicates the nature of 

the condition or fault.

THE FLASH CODES

1 Flash
•  Indicates that the battery voltage (with 

the thumb levers in the neutral posi-
tion) is below 23.3 volts.

•  The batteries need to be charged.
•  Your Companion will continue to op-

erate  until  the  voltage  falls  to  17.5 
volts.

•  As the voltage drops you will experi-

ence a power loss.

Remedy: Charge your Companion’s bat-

teries.  See  section  XI.  “Care 
and Maintenance.”

DIAGNOSTICS

POWER-ON/DIAGNOSTICS LED

FIGURE 44.  CHARGER LED’S

2 Flashes
•  Indicates that the battery voltage has dropped to 17.5 volts.
•  At this voltage your scooter will cease operation.
•  If you have charged the batteries and the condition continues, one or both of the 

scooter’s batteries may be at fault.

•  The continuance of this condition after you have charged your Companion’s batteries 

may also indicate a problem with the battery charger.

Remedy: Consult your authorized Golden Technologies, Inc. dealer.

FIGURE 43.  CONTROL PANEL 

DIAGNOSTICS

CHARGER LED’S

Companion Owner's Manual:  GC222, GC223, GC322, GC323, GC325, GC421