Gateway DVD Player 用户手册

www.gateway.com

■

If the video cables are damaged, replace them.

■

Make sure that the player is connected to the correct TV input.

■

Make sure that the video input on the TV is set to view the DVD player.

■

Make sure that video is set to the correct mode. Press the 

 button 

on the remote control until a picture is visible.

■

Make sure that the DVD is not dirty or flawed.

■

If the picture output from your player goes through your VCR to get to 
your TV, the copy-protection signal used on some DVDs could diminish 
the picture quality. Try connecting the player directly to the TV. If you still 
experience problems, try connecting your player to your TV’s S-Video 
input.

■

Change the aspect ratio. For more information, see 

■

If the picture does not change, the DVD’s aspect ratio may be fixed and 
cannot be adjusted.

■

Make sure that all audio cables are securely plugged in.

■

If any audio or speaker cables are damaged, replace them.

■

Make sure that the volume is turned up on your TV.

■

Make sure that the player’s audio settings match your TV and audio system 
settings.

■

The player may be in Pause, Slow Motion, or Forward/Reverse Scan mode. 
Press 

 on the remote control to return to normal playback mode.

■

Make sure your audio cables are correctly connected. For more 
information, see 

.

■

Depending on the DVD, the audio output may not use all 5.1 channels, 
but instead output mono or stereo sound, even if the soundtrack is 
recorded in Dolby Digital format.