Moen T2113 Series 产品宣传页
S p e c i f i c a t i o n s
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 4/08
THIN WALL APPLICATION
THICK WALL APPLICATION
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
7" (178mm)
ESCUTCHEON
DIAMETER
2" CC (51mm)
1 7/8" IPS (48mm)
MAX WALL
HOT
INLET
COLD
INLET
INLET
FINISHED WALL LINE
FACE OF STUD
4-1/2" (114mm)
WALL OPENING
FLOOR
45" (1143mm)/
48" (1219mm)-SHOWER
32" (813mm)-TUB OR
TUB SHOWER
7-1/2"
(191mm)
MIN.
TUB RIM
6'-6"
(1981mm)
L
C
1 3/8" (35mm)
2 1/2" MAX. (63mm)
1/2" MIN. CC (13mm)
5/8" MIN. IPS (16mm)
5/8" MIN. IPS (16mm)
FLOOR LINE
1 3/8"
(35mm)
1 1/2"
(38mm)
3/16" (typ) (5mm)
PLASTER GROUND
3-1/2" (89mm) MAX.
2-1/4" (57mm) MIN.
DIAMETER
WALL
OPENING
PLASTIC
TUB/SHOWER
SURROUND
L
C
KINGSLEY
™
POSI-TEMP
®
Single-Handle Tub/Shower (Trim Only)
Models: T2113 series
FAUCET DESCRIPTION
•
Metal construction with various finishes identified by suffix
•
Includes showerhead, arm, flange and diverter spout
OPERATION
•
Handle operates counterclockwise through a 270º arc
with off at 6 o’clock and maximum hot at the 9 o’clock
position. Shut off in clockwise direction
with off at 6 o’clock and maximum hot at the 9 o’clock
position. Shut off in clockwise direction
•
Adjustable temperature limit stop to control maximum
hot water temperature
hot water temperature
•
Pressure balancing mechanism maintains selected
discharge temperature to ± 2°
discharge temperature to ± 2°
FLOW
•
Showerhead limited to 2.5 gpm (9.5 L/min)
CARTRIDGE
•
1222 cartridge design
•
Nonmetallic/nonferrous and stainless steel materials
•
Accommodates back to back installations
STANDARDS
•
Third party certified to ASME A112.18.1/CSA B-125.1,
ICC A117.1 and all applicable requirements referenced therein
ICC A117.1 and all applicable requirements referenced therein
• ADA
for lever handle
WARRANTY
•
Lifetime limited warranty against leaks, drips and finish
defects to the original consumer purchaser
defects to the original consumer purchaser
•
5 year warranty if used in commercial installations