用户手册目录Specifications5Introduction6Installation73.1 Unpacking and Inspection73.2 Data Flow Control7SW37SW28Self-Diagnostics9Reconfigure Switch Mode9RS-232 Pass-through Options10Reset Options103.3 Preparing A/S-2G for Connection to an Asynchronous Device10Data Terminal Ready (DTR) Signal Options10Clear to Send (CTS) Signal Options11Baud Rate Options11Modem or Direct-to-Terminal Connection11Carrier Options12Cable Requirement123.4 Preparing the A/S-2G for Connection to a Synchronous Device12Data Terminal Ready (DTR) Signal Options12Clear to Send (CTS) Signal Options12Baud Rate Options13Modem or Direct-to-Terminal Connection13External or Internal Clocking Option13Carrier Options13Cable Requirement13Command Pass-Thru14Operation154.1 Asynchronous Device to Synchronous Device15Line Control15Asynchronous Input Data Format15Data Conversion15Record and Block Size15Use of Carriage Return16Flow Control16Presentation of Data from A/S-2G to Synchronous Device17Verification of Data Reception17Line Turnaround174.2 Synchronous Device to Asynchronous Device22Line Control22Synchronous Input Data Format22Data Conversion22Flow Control22Verification of Data Reception22Line Turnaround22Conversions and Connections275.1 Transparency Mode of Operation275.2 Installing or Replacing PROMs275.3 RS-232 Cable Chart275.4 Code Conversions295.5 Printed Circuit Board Layout31文件大小： 180.5 KB页数： 33Language: English打开用户手册
