用户手册 — Frigidaire FPEF3077QF

目录

• Product Record and Registration

  2
• Important Safety Instructions

  3
• Before Setting Surface Controls

  8
• Setting Surface Controls

  11
• Before Setting Oven Controls

  14
• Setting Oven Controls

  15
  • Cleaning Various Parts of Your Oven

    30
  • Cooktop Maintenance

    31
    • Figure 36: Cooktop care

      31
  • Cooktop Cleaning

    31
    • Figure 37: Cooktop cleaning

      31
  • Cooktop Maintenance (cont’d)

    32
    • Figure 38: Cleaning products to avoid

      32
  • Removing and Replacing the Oven Door

    33
    • 1. Open oven door completely, horizontal with floor (See Figure 39).

      33
    • 2. Pull the door hinge locks on both left and right door hinges down from the oven frame completely towards the oven door (See Figure 40). A tool such as a small flat-blade screwdriver may be required.

      33
    • 3. Firmly grasp both sides of oven door along the door sides. Do not use the oven door handle (See Figure 41).

      33
    • 4. Close the door to approximately 10 degrees from the door frame (See Figure 41).

      33
    • 5. Lift the oven door hinge arms over the roller pins located on each side of the oven frame (See Figure 42).

      33
    • 1. Firmly grasp both sides of oven door along the door sides. Do not use the oven door handle (See Figure 41).

      33
    • 2. Holding the oven door at the same angle as the removal position, seat the hook of the hinge arm over the roller pins located on each side of the oven door frame (See Figure 41 and Figure 42). The hook of the hinge arms must be fully seated onto th...

      33
    • 3. Fully open the oven door, horizontal with floor (See Figure 39).

      33
    • 4. Push the door hinge locks up towards and into the oven frame on both left and right oven door hinges to the locked position (See Figure 40).

      33
    • 5. Close the oven door.

      33
    • Figure 39: Door hinge location

      33
    • Figure 40: Door hinge locks

      33
    • Figure 41: Holding door for removal

      33
    • Figure 42: Replacement and location of hinge arm and roller pin

      33
  • Replacing the Oven Light

    34
    • 1. Turn electrical power off at the main source or unplug the appliance.

      34
    • 2. Remove interior oven light shield after removing the wire holder by carefully moving the wire to the side of the glass shield. The tension from the wire holds the glass shield in place.

      34
    • 3. Pull the shield straight out. Do not twist or turn.

      34
    • 4. Replace bulb with a new appliance bulb.

      34
    • 5. Replace glass oven light shield. Replace wire holder.

      34
    • 6. Turn power back on again at the main source (or plug the appliance back in).

      34
    • 7. Be sure to reset the time of day on the clock.

      34
    • Figure 43: Oven light protected by glass shield

      34
  • Care and Cleaning

    30
• Before You Call

  35
• Warranty

  40