用户手册目录BEFORE YOU BEGIN...................................................................................…. 12IMPORTANT SAFETY NOTICES..................................................................…. 22HARDWARE IDENTIFIER.....…....................................................................…. 42ASSEMBLY INSTRUCTIONS........................................................................…. 52EXPLODED DIAGRAM………………………………………………………………. 112PARTS LIST...............................................................................................……. 122WARRANTY.................................................................................................…. 132ORDERING PARTS.......................................................................................… 132ASSEMBLY INSTRUCTION6Attach the Left Handle (#8) to Front Support Frame (#1). Secure it with one M8 x ¾” Allen Bolt (#35), one Ø 5/8” Washer (#46), and one M8 Aircraft Nut (#43).9Attach the Left Handle to the Rear Support Frame (#2). Secure it with one M8 x 1 ¾” Allen Bolt (#36), one Ø 5/8” Washer (#46), and one M8 Aircraft Nut (#43).9Repeat Procedures A & B to install the Right Handle (#9).9Pull up the Foot Adjustment Lock Pin (#23). Insert the Foot Lock Frame (#13) into the Adjustment Fame (#11). Push down the Pin to securely lock the Foot Lock Frame in position.10Insert the Foot Support (#6) into the bottom of Adjustment Frame. Secure it with one M8 x 1 5/8” Allen Bolt (#40), one Ø 5/8” Washer (#46), and one M8 Aircraft Nut (#43).10Insert the Foam Tube halfway through the hole on Adjustment Frame. Push two Foam Rolls (#17) onto the Tube from both ends.10Push two Curved Foam Rolls (#16) onto the tube on Foot Lock Frame from both ends.10DIAGRAM 410Pull out the Backrest Adjustment Lock Pin (#22). Insert the Adjustment Frame (#11) into the opening on the vertical frame on the back of Backrest Frame (#7). Push back the Pin into the selected hole on Adjustment Frame.11Insert the Ring Lock Pin (#21) through the hole on the vertical frame and hole on Adjustment Frame to securely lock the Adjustment Frame.11Attach hook on Inversion Adjustment Belt (#15) to Front Support Frame (#1) and to the vertical frame on Backrest Frame. Adjust the length of the Belt to adjust the extension of inversion.11Attach one side of U-shaped Lock Pin (#14) on front of Adjustment Frame, insert the other side into hole on Front Support Frame and secure with one M8 Aircraft Nut to lock Inversion Table for usage.11When using the Inversion Table, remove the side of U-shaped Lock Pin off from Adjustment Frame.11DIAGRAM 5111 Front Support Frame 11314 U-shaped Lock Pin 11316 Curved Foam Roll 21317 Foam Roll 213文件大小: 1.1 MB页数: 14Language: English打开用户手册