用户指南目录Important safety instructions81 Read these instructions.82 Keep these instructions.83 Heed all warnings.84 Follow all instructions.85 Do not use this apparatus near water.86 Clean only with dry cloth.87 Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.88 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.89 Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than ...810 Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.811 Only use attachments/accessories specified by the manufacturer.812 Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.813 Unplug this apparatus during lightning storms or when unused for long periods of time.814 Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, suc...815 The mains plug is the disconnecting device. The plug must remain readily operable.816 The apparatus with grounding-type plug is a class I apparatus. Class I apparatus need to be connected to earth ground wire to...817 Remote control batteries should not be exposed to excessive heat such as sunshine, fire, or the like.818 The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.8Warnings8Electric shock hazard8Lightning8Power lines8Handling the LCD panel8Replacement parts8Safety check8Power source9Cautions9Damage requiring service9Outdoor antenna grounding9Note to CATV system installer9Condensation9Mobile telephone warning9Installing the stand or a wall-mount bracket10Installing the stand101 Place a towel or cushion on a flat surface, then lay your TV/DVD combo face-down on the towel or cushion.102 Find the insert place on the stand.103 Slide the stand into the insert place.104 Secure the stand with the four provided screws.10Attaching a wall-mount bracket101 If the stand is installed, remove the four screws that secure the stand to the TV, then remove the stand.102 Secure the wall-mount bracket (not provided) to the back of your TV/DVD combo using the screws that secured the stand to your TV. These are M4*16 (4 mm diameter and 16 mm screw thread length) screws.10TV components11Package contents11Front11Back12Remote Control13Using the remote control14Installing remote control batteries141 Remove the battery compartment cover.142 Insert two AAA batteries into the battery compartment. Make sure that you match the + and - symbols on the batteries with the + and - symbols in the battery compartment.143 Replace the cover.14Aiming the remote control14Programming a universal remote control to work with your TV151 Find the code for your universal remote control by identifying its model (or your set-top box’s remote control manufacturer an...152 Follow your universal remote control’s instructions to enter the TV code you found in Step 1.153 If all else fails, you must use a different universal remote control that can operate both your set-top box and your TV. Four such remotes are listed on the chart, but many other compatible models are available in the market.15Making connections15Connecting the power cord15Connecting an antenna, cable TV, or satellite TV151 Make sure that your TV/DVD combo is turned off and the power cord is disconnected.152 Connect one end of a coaxial cable to the ANT. INPUT jack on the back of your TV/DVD combo, then connect the other end to the antenna, cable TV, or satellite TV jack.153 Turn on your TV/DVD combo.154 Press INPUT on the remote control or the side of your TV to display the input source menu, then press INPUT repeatedly or press or to select TV. Press OK/ENTER.15Connecting a standard video device161 Make sure that your TV/DVD combo is turned off and the power cord is disconnected.162 Connect an AV cable into the AV1 INPUT (VIDEO and L/R AUDIO) jacks on the back of your TV/DVD combo, then connect the other end of the cable to the AV OUTPUT jacks on the external device.163 Turn on your TV/DVD combo.164 Press INPUT on the remote control or the side of your TV to display the input source menu, then press INPUT repeatedly or press or to select AV1. Press OK/ENTER.161 Make sure that your TV/DVD combo is turned off and the power cord is disconnected.162 Connect an AV cable into the AV2 INPUT (VIDEO and L/R AUDIO) jacks on the side of your TV/DVD combo, then connect the other end of the cable to the AV OUTPUT jacks on the external device.163 Turn on your TV/DVD combo.164 Press INPUT on the remote control or the side of your TV to display the input source menu, then press INPUT repeatedly or press or to select AV2. Press OK/ENTER.16Connecting an S-Video device171 Make sure that your TV/DVD combo is turned off and the power cord is disconnected.172 Connect one end of an S-Video cable to the S-VIDEO INPUT jack on the back of your TV/DVD combo, then connect the other end of the cable to the S-VIDEO OUT jack on the S-Video device.173 Connect one end of an audio cable to the S-VIDEO INPUT (L/R AUDIO) jacks under the S-VIDEO INPUT jack on the back of your TV/DVD combo, then connect the other end of the cable to the corresponding audio jacks on the external device.174 Turn on your TV/DVD combo.175 Press INPUT on the remote control or the side of your TV to display the input source menu, then press INPUT repeatedly or press or to select S-Video. Press OK/ENTER.17Connecting a component video device171 Make sure that your TV/DVD combo is turned off and the power cord is disconnected.172 Connect one end of the component video cable to the COMPONENT1 INPUT (Y, CB/PB, and CR/PR) or COMPONENT2 INPUT (Y, CB/PB, and ...173 Connect one end of an audio cable to the COMPONENT1 INPUT (L/R AUDIO) or COMPONENT2 INPUT (L/R AUDIO) to the right of the vide...174 Turn on your TV/DVD combo.175 Press INPUT on the remote control or the side of your TV to display the input source menu, then press INPUT repeatedly or press or to select Component 1 or Component 2. Press OK/ENTER.17Connecting an HDMI device181 Make sure that your TV/DVD combo is turned off and the power cord is disconnected.182 Connect one end of an HDMI cable to the HDMI1 INPUT jack on the back of your TV/DVD combo or to the HDMI2 INPUT jack on the side of your TV/DVD combo, then connect the other end of the cable to the HDMI OUT jack on the external device.183 Turn on your TV/DVD combo.184 Press INPUT on the remote control or the side of your TV to display the input source menu, then press INPUT repeatedly or press or to select HDMI1 or HDMI2. Press OK/ENTER.18Connecting a DVI device181 Make sure that your TV/DVD combo is turned off and the power cord is disconnected.182 Connect one end of an HDMI-to-DVI cable to the HDMI1 INPUT jack on the back of your TV/DVD combo or to the HDMI2 INPUT jack on the side of your TV/DVD combo, then connect the other end of the cable to the DVI OUT jack on the external device.183 Connect an audio cable to the VGA AUDIO INPUT jack on the back of your TV/DVD combo, then connect the other end of the cable into the AUDIO OUT jack on the DVI device.184 Turn on your TV/DVD combo.185 Press INPUT on the remote control or the side of your TV to display the input source menu, then press INPUT repeatedly or press or to select HDMI1 or HDMI2. Press OK/ENTER.18Connecting a computer191 Make sure that your TV/DVD combo is turned off and the power cord is disconnected.192 Connect a VGA cable to the VGA INPUT jack on the back of your TV/DVD combo, then plug the other end of the cable into the VGA jack on the computer.193 Connect an audio cable to the VGA AUDIO INPUT jack on the back of your TV/DVD combo, then connect the other end of the cable into the LINE OUT jack on the computer.194 Turn on your TV/DVD combo.195 Press INPUT on the remote control or the side of your TV to display the input source menu, then press INPUT repeatedly or press or to select VGA. Press OK/ENTER.19Connecting a computer using HDMI or DVI191 Make sure that your TV/DVD combo is turned off and the power cord is disconnected.192 Connect one end of an HDMI cable to to the HDMI1 INPUT jack on the back of your TV/DVD combo or to the HDMI2 INPUT jack on the side of your TV/DVD combo, then connect the other end of the cable to the HDMI jack on the computer.193 If you are connecting to a DVI jack on the computer, connect an audio cable to the VGA AUDIO INPUT jack on the back of your TV/DVD combo, then connect the other end of the cable into the LINE OUT jack on the computer.194 Turn on your TV/DVD combo.195 Press INPUT on the remote control or the side of your TV to display the input source menu, then press INPUT repeatedly or press or to select HDMI1 or HDMI2. Press OK/ENTER.20Connecting a standard sound system201 Make sure that your TV/DVD combo is turned off and the power cord is disconnected.202 Connect a standard audio cable to the AUDIO L/R OUTPUT jacks on the back of your TV/DVD combo, then connect the other end of the cable to the audio L and R input jacks on the external device.20Connecting a digital sound system201 Make sure that your TV/DVD combo is turned off and the power cord is disconnected.202 Connect one end of a coaxial cable to the COAXIAL OUTPUT jack on the back of your TV/DVD combo, then connect the other end of the cable to the COAXIAL IN jack on the external device.20Connecting a TV211 Make sure that your TV/DVD combo is turned off and the power cord is disconnected.212 Connect one end of a video cable to the DVD VIDEO OUTPUT jack on the back of your TV/DVD combo, then connect the other end of the cable to the VIDEO INPUT jack on the external TV.213 Connect a standard audio cable to the AUDIO L/R OUTPUT jacks on the back of your TV/DVD combo, then connect the other end of the cable to the AUDIO L and R INPUT jacks on the external TV.21Turning on your TV for the first time211 Make sure that you have:212 Press POWER to turn on your TV/DVD combo. The Choose your menu Language screen opens.213 Press or to highlight English, Français, or Español, then press OK/ENTER. The Choose your TV source screen opens.214 Press or to highlight:215 Press OK/ENTER. Your TV/DVD combo scans for channels, if necessary.22Understanding the basics22Turning your TV/DVD combo on and off221 Press POWER. The power indicator turns blue and your TV/DVD combo turns on.222 To turn off your TV/DVD combo, press POWER again. Your TV/DVD combo turns off and the power indicator turns red.22Selecting the video input mode221 Press INPUT to display the input source menu, then press INPUT repeatedly or press or to select a video input mode. You can select:222 Press OK/ENTER.22Selecting a channel22Adjusting the volume22Viewing channel information221 In digital TV mode, select a channel you want to watch.222 Press INFO to display information about the program content, if available.223 Press INFO again to close the display.22Adjusting the picture23Adjusting the picture231 Press TV MENU, then press or to highlight the Picture icon. The Picture menu appears.232 Press to access the Picture menu.233 Press or to highlight a setting, then press or to adjust the setting or open a setting menu. If a another menu opens, press , , , or to adjust the setting. You can select:234 Press TV MENU one or more times to return to the previous menu.235 Press EXIT to close the menu.23Adjusting advanced video settings231 On the Picture menu, press or to highlight Advanced Video, then press or to open the Advanced Video menu. One of the following menus opens:232 Press or to highlight a setting, then press or to adjust the setting or open a setting menu. If a another menu opens, press , , , or to adjust the setting. You can select:233 Press TV MENU one or more times to return to the previous menu.234 Press EXIT to close the menu.23Adjusting VGA settings241 Press TV MENU, then press or to highlight the Settings icon. The Settings menu appears.242 Press to access the Settings menu.243 Press or to highlight Computer Settings, then press or to open the Computer Settings menu.244 Press or to highlight a setting, then press or to adjust the setting or open a settings menu. If another menu opens, press or to adjust the setting. You can select:245 Press TV MENU one or more times to return to the previous menu.246 Press EXIT to close the menu.24Changing the PC’s video resolution241 Click Start, Control Panel, then double-click Display. The Display Properties dialog box opens.242 Click the Settings tab.243 Change the screen resolution setting to a supported resolution. The ideal resolution for your TV/DVD combo is 1360 ° 768.244 Click OK, then click Yes to save your changes.24PC signal input chart24Adjusting the sound25Adjusting the sound251 Press TV MENU, then press or to highlight the Audio icon. The Audio menu appears.252 Press to access the Audio menu.253 Press or to highlight a setting, then press or to adjust the setting or open a setting menu. If a another menu opens, press or to adjust the setting. You can select:254 Press TV MENU one or more times to return to the previous menu.255 Press EXIT to close the menu.25Selecting the audio mode25Changing channel settings25Automatically scanning for channels251 Press TV MENU, then press or to highlight the Channel icon. The Channel menu appears.252 Press to access the Channel menu.253 Press or to highlight Auto Channel Search, then press or . The Auto Search menu opens.264 Press or to highlight the TV signal source you are using. You can select:265 Press OK/ENTER to start scanning. Your TV/DVD combo scans for channels in your viewing area and stores the channel information in the channel list. When the scan is complete, your TV/DVD combo tunes to the first channel in the channel list.26Selecting the signal source261 Press TV MENU, then press or to highlight the Channel icon. The Channel menu appears.262 Press to access the Channel menu.263 Press or to highlight Antenna/Cable, then press or . The Antenna/Cable menu opens.264 Press or to highlight Antenna or Cable.265 Press TV MENU one or more times to return to the previous menu.266 Press EXIT to close the menu.26Hiding channels261 Make sure that you have scanned for channels. For more information, see “Automatically scanning for channels” on page 19.262 Press TV MENU, then press or to highlight the Channel icon. The Channel menu appears.263 Press to access the Channel menu.264 Press or to highlight Add/Skip Channels, then press or . The Add/Skip Channels menu opens.265 Press or to highlight the channel you want to hide, then press OK/ENTER.266 Press TV MENU one or more times to return to the previous menu.267 Press EXIT to close the menu.26Setting up the favorite channel list271 Press TV MENU, then press or to highlight the Channel icon. The Channel menu appears.272 Press to access the Channel menu.273 Press or to highlight Favorites, then press or . The Favorite menu opens.274 Press or to highlight the channel you want to add to the favorite channel list, then press OK/ENTER. A check mark appears next to the channel and the channel is add to the favorite channel list.275 Repeat Step 4 to add more channels to the favorite channel list.276 Press TV MENU one or more times to return to the previous menu.277 Press EXIT to close the menu.271 Press FAVORITE one or more times until the favorite channel list appears.272 Press or to select a channel. If the list has more than one page, press or to scroll through the pages.273 Press FAVORITE to close the list and tune to the channel you selected.27Deleting a channel from the favorite channel list281 Press TV MENU, then press or to highlight the Channel icon. The Channel menu appears.282 Press to access the Channel menu.283 Press or to highlight Favorites, then press or . The Favorite menu opens.284 Press or to highlight the channel you want to delete from the list, then press OK/ENTER. The check mark next to the channel disappears and the channel is deleted from the list.285 Press TV MENU one or more times to return to the previous menu.286 Press EXIT to close the menu.28Adding a channel label281 Press TV MENU, then press or to highlight the Channel icon. The Channel menu appears.282 Press to access the Channel menu.283 Press or to highlight Channel Label, then press or . The Channel Label screen opens with CH (channel number) highlighted.284 Press or to select the channel you want to label.285 Press or to move the cursor to the first label character space.286 Press or one or more times to select the first label character, then press or to move to the next character space.287 Repeat Step 6 to enter more characters.288 Press or to highlight Yes, then press OK/ENTER.289 Press TV MENU one or more times to return to the previous menu.2810 Press EXIT to close the menu.28Checking the digital channel strength291 Press TV MENU, then press or to highlight the Channel icon. The Channel menu appears.292 Press to access the Channel menu.293 Press or to highlight Channel Strength, then press or . The channel strength indicator appears.294 Press or to select the channel you want and to view the selected channel strength.295 Press TV MENU one or more times to return to the previous menu.296 Press EXIT to close the menu.29Using the electronic program guide291 In digital TV mode, select a channel you want to watch.292 Press GUIDE. The EPG displays information about the channel you selected.293 Press or to view information about future programs on the selected channel.294 Press GUIDE one or more times to close the EPG.29Setting parental controls29Turning parental controls on or off291 Press TV MENU, then press or to highlight the Settings icon. The Settings menu appears.292 Press to access the Settings menu.293 Press or to highlight Parental Controls, then press or . The Enter Password screen opens.294 Press the number buttons to enter the password. The default password is 0000. The Parental Controls menu opens.295 Press or to select System Lock, then press or to select On or Off. To change the Input Block, US Ratings, Canadian Ratings, RRT Settings, or Reset RRT option, the System Lock must be set to On.296 Press TV MENU one or more times to return to the previous menu.307 Press EXIT to close the menu.30Blocking a video input source301 Press TV MENU, then press or to highlight the Settings icon. The Settings menu appears.302 Press to access the Settings menu.303 Press or to highlight Parental Controls, then press or . The Enter Password screen opens.304 Press the number buttons to enter the password. The default password is 0000. The Parental Controls menu opens.305 Press or to select System Lock, then press or to select On. To select the Input Block option, the System Lock must be set to On.306 Press or to highlight Input Block, then press or to open the Input Block menu.307 Press or to highlight the video input source you want to block, then press OK/ENTER. A lock icon appears next to the video inp...308 Press TV MENU one or more times to return to the previous menu.309 Press EXIT to close the menu.30Blocking U.S. TV programs30U.S. TV program ratings301 Press TV MENU, then press or to highlight the Settings icon. The Settings menu appears.312 Press to access the Settings menu.313 Press or to highlight Parental Controls, then press or . The Enter Password screen opens.314 Press the number buttons to enter the password. The default password is 0000. The Parental Controls menu opens.315 Press or to select System Lock, then press or to select On. To select the US Ratings option, the System Lock must be set to On.316 Press or to highlight US Ratings, then press or to open the US Ratings menu.317 Press or to highlight TV Ratings, then press or to open the TV Ratings menu.318 Press or to highlight the TV rating you want to block, then press OK/ENTER. A lock icons appears next to the rating you block. That rating and all higher ratings are blocked.319 Press TV MENU one or more times to return to the previous menu.3110 Press EXIT to close the menu.31Blocking movies32Movie ratings321 Press TV MENU, then press or to highlight the Settings icon. The Settings menu appears.322 Press to access the Settings menu.323 Press or to highlight Parental Controls, then press or . The Enter Password screen opens.324 Press the number buttons to enter the password. The default password is 0000. The Parental Controls menu opens.325 Press or to select System Lock, then press or to select On. To the US Ratings option, the System Lock must be set to On.326 Press or to highlight US Ratings, then press or to open the US Ratings menu.327 Press or to highlight Movies Ratings, then press or to open the Movie Ratings menu.328 Press or to highlight the movie rating you want to block, then press OK/ENTER. A lock icons appears next to the rating you block. That rating and all higher ratings are blocked.329 Press TV MENU one or more times to return to the previous menu.3310 Press EXIT to close the menu.33Blocking Canadian TV programs33Canadian English ratings33Canadian French ratings331 Press TV MENU, then press or to highlight the Settings icon. The Settings menu appears.332 Press to access the Settings menu.333 Press or to highlight Parental Controls, then press or . The Enter Password screen opens.334 Press the number buttons to enter the password. The default password is 0000. The Parental Controls menu opens.335 Press or to select System Lock, then press or to select On. To select the Canadian Ratings option, the System Lock must be set to On.336 Press or to highlight Canadian Ratings, then press or to open the Canadian Ratings menu.337 Press or to highlight Canadian English or Canadian French, then press or to open the Canadian English or Canadian French menu.348 Press or to select the rating you want to block, then press OK/ENTER. A lock icon appears next to the rating. That rating and all higher ratings are blocked.349 Press TV MENU one or more times to return to the previous menu.3410 Press EXIT to close the menu.34Using downloaded rating information34Changing the password341 Press TV MENU, then press or to highlight the Settings icon. The Settings menu appears.342 Press to access the Settings menu.343 Press or to highlight Parental Controls, then press or . The Enter Password screen opens.344 Press the number buttons to enter the password. The default password is 0000. The Parental Controls menu opens.345 Press or to highlight Change Password, then press or to open the Change Password screen.356 Press the number buttons to enter the new password, the enter the new password again to confirm.357 Press TV MENU one or more times to return to the previous menu.358 Press EXIT to close the menu.35Using closed captioning35Selecting the closed captioning mode351 Press TV MENU, then press or to highlight the Settings icon. The Settings menu appears.352 Press to access the Settings menu.353 Press or to highlight Closed Caption, then press or to open the Closed Caption menu.354 Press or to highlight a setting, then press or to adjust the setting or open a settings menu. If another menu opens, press or to adjust the setting. You can select:355 Press TV MENU one or more times to return to the previous menu.356 Press EXIT to close the menu.35Setting closed captioning styles351 Press TV MENU, then press or to highlight the Settings icon. The Settings menu appears.352 Press to access the Settings menu.353 Press or to highlight Closed Caption, then press or to open the Closed Caption menu.354 Press or to highlight Option, then press or to open the Option menu.365 Press or to select a style, then press or to adjust the setting. You can select:366 Press TV MENU one or more times to return to the previous menu.367 Press EXIT to close the menu.36Adjusting time settings361 Press TV MENU, then press or to highlight the Settings icon. The Settings menu appears.362 Press to access the Settings menu.363 Press or to highlight Time, then press or to open the Time Settings menu.364 Press or to highlight a setting, then press or to adjust the setting. You can select:365 Press TV MENU one or more times to return to the previous menu.366 Press EXIT to close the menu.36Manually setting the current date and time371 Press TV MENU, then press or to highlight the Settings icon. The Settings menu appears.372 Press to access the Settings menu.373 Press or to highlight Time, then press or to open the Time Settings menu.374 Press or to highlight Mode, then press or to select Custom.375 Press or to highlight Date/Time, then press or to open the Date/Time screen.376 Press or to highlight a setting, then press or to open a setting menu. You can select:377 Press TV MENU one or more times to return to the previous menu.378 Press EXIT to close the menu.37Setting the sleep timer371 Press TV MENU, then press or to highlight the Settings icon. The Settings menu appears.372 Press to access the Settings menu.373 Press or to highlight Time, then press or to open the Time Settings menu.374 Press or to highlight Sleep Timer, then press or to open the Sleep Timer menu.375 Press or to select the amount of time you want your TV/DVD combo to wait before it automatically turns off.376 Press TV MENU one or more times to return to the previous menu.387 Press EXIT to close the menu.38Setting the wake timer381 Press TV MENU, then press or to highlight the Settings icon. The Settings appears opens.382 Press to access the Settings menu.383 Press or to highlight Time, then press or to open the Time Settings menu.384 Press or to highlight Wake Timer, then press or to open the Wake Timer screen.385 Press or to highlight a setting, then press or to open a setting menu. You can select:386 Press TV MENU one or more times to return to the previous menu.387 Press EXIT to close the menu.38Adjusting menu settings38Selecting the menu language and transparency381 Press TV MENU, then press or to highlight the Settings icon. The Settings menu appears.382 Press to access the Settings menu.383 Press or to highlight Menu Settings, then press or to open the Menu Settings menu.384 Press or to highlight a setting, press or to open a setting menu, then press or to adjust the setting. You can select:385 Press TV MENU one or more times to return to the previous menu.386 Press EXIT to close the menu.38Changing video input labels391 Press TV MENU, then press or to highlight the Settings icon. The Settings menu appears.392 Press to access the Settings menu.393 Press or to highlight Input Labels, then press or to open the Input Labels screen. When the screen opens, the Input Source column is highlighted.394 Press or to highlight the video input source you want to label.395 Press or to move the cursor to the New Label column, then press or to highlight a label for the input source.396 Press or to highlight Yes, then press OK/ENTER. The label is changed.397 Press TV MENU one or more times to return to the previous menu.398 Press EXIT to close the menu.39Using the DVD player39Playing a DVD391 Press POWER to turn on your TV/DVD combo.392 Press INPUT, press or to highlight DVD, then press OK/ENTER. You can also press DVD on the remote control to select DVD mode. The DVD startup screen appears.393 Insert a DVD into the disc slot, with the label facing forward. The DVD player reads the DVD and displays the opening menu.394 Press or to highlight a menu item, then press OK/ENTER.395 During playback:396 Press to eject the DVD.39Playing an audio CD391 Press POWER to turn on your TV/DVD combo.392 Press INPUT, press or to highlight DVD, then press OK/ENTER. You can also press DVD on the remote control to select DVD mode. The DVD startup screen appears.393 Insert a CD into the disc slot, with the label facing forward.394 During playback:405 Press to eject the CD.40Using DVD repeat play401 While the DVD is playing, press REPEAT one or more times to select:402 To stop repeat playback, do one of the following:40Using CD repeat play401 While the CD is playing, press REPEAT one or more times to select:402 To stop repeat playback, do one of the following:40Using a DVD title menu401 While the DVD is playing, press DVD/TITLE.402 Press or to highlight a title, then press OK/ENTER to start playback.40Creating a playback loop401 Play the disc until it reaches the starting point for the loop, then press A-B.402 Play the disc until it reaches the stopping point for the loop, then press A-B. The DVD player plays the loop.403 To resume normal playback, press A-B again.40Selecting the subtitle language401 Press SUBTITLE one or more times to cycle through the available subtitle languages.402 To turn off subtitles, press SUBTITLE until TURN OFF SUBTITLE appears on the screen.40Using a DVD menu411 While the DVD is playing, press DVD/MENU.412 Press or to highlight a feature, then press OK/ENTER.41Changing the DVD audio language411 Press AUDIO. The on-screen display (OSD) shows the current audio language.412 If multiple audio languages are available, press AUDIO one or more times to cycle through the available languages.41Turning DVD captions on or off411 While your TV/DVD combo is in DVD mode, press SETUP. The icon is highlighted.412 Press OK/ENTER. The GENERAL SETUP PAGE opens.413 Press or to highlight CAPTIONS, then press OK/ENTER.414 Press or to highlight ON or OFF, then press OK/ENTER.415 Press one or more times to go back to the previous menu.416 To close the menu, press to highlight the icon, then press OK/ENTER.41Changing the DVD display mode421 While your TV/DVD combo is in DVD mode, press SETUP. The icon is highlighted.422 Press OK/ENTER. The GENERAL SETUP PAGE opens.423 Press or to highlight TV DISPLAY, then press OK/ENTER.424 Press or to highlight the display mode you want, then press OK/ENTER. You can select:425 Press one or more times to go back to the previous menu.426 To close the menu, press to highlight the icon, then press OK/ENTER.42Setting up the TV output431 While your TV/DVD combo is in DVD mode, press SETUP. The icon is highlighted.432 Press OK/ENTER. The GENERAL SETUP PAGE opens.433 Press or to highlight TV OUTPUT, then press OK/ENTER.434 Press or to highlight YPbPr or YCbCr, then press OK/ENTER.435 Press one or more times to go back to the previous menu.436 To close the menu, press to highlight the icon, then press OK/ENTER.43Turning the screen saver on and off431 While your TV/DVD combo is in DVD mode, press SETUP. The icon is highlighted.432 Press OK/ENTER. The GENERAL SETUP PAGE opens.433 Press or to highlight SCREEN SAVER, then press OK/ENTER.434 Press or to highlight ON or OFF, then press OK/ENTER.435 Press one or more times to go back to the previous menu.436 To close the menu, press to highlight the icon, then press OK/ENTER.43Using DVD last memory441 While your TV/DVD combo is in DVD mode, press SETUP. The icon is highlighted.442 Press OK/ENTER. The GENERAL SETUP PAGE opens.443 Press or to highlight LAST MEMORY, then press OK/ENTER.444 Press or to highlight ON or OFF, then press OK/ENTER.445 Press one or more times to go back to the previous menu.446 To close the menu, press to highlight the icon, then press OK/ENTER.44Setting up DVD speaker output441 While your TV/DVD combo is in DVD mode, press SETUP. The icon is highlighted.442 Press or to highlight (audio), then press OK/ENTER. The AUDIO SETUP PAGE opens.443 Press or to highlight SPEAKER SETUP, then press OK/ENTER. The second SPEAKER SETUP PAGE opens.444 Press or to highlight DOWNMIX, then press OK/ENTER.445 Press or to highlight Lt/Rt or STEREO, then press OK/ENTER.446 Press one or more times to go back to the previous menu.457 To close the menu, press to highlight the icon, then press OK/ENTER.45Setting up DVD Dolby Digital451 While your TV/DVD combo is in DVD mode, press SETUP. The icon is highlighted.452 Press or to highlight (audio), then press OK/ENTER. The AUDIO SETUP PAGE opens.453 Press or to highlight DOLBY DIGITAL SETUP, then press OK/ENTER. The DOLBY DIGITAL SETUP PAGE opens.454 Press or to highlight DUAL MONO or D.R.C., then press OK/ENTER.455 Press or to highlight STEREO, LEFT MONO, RIGHT MONO, or MIXED MONO, then press OK/ENTER.456 Press or to change the setting, then press OK/ENTER.457 Press one or more times to go back to the previous menu.458 To close the menu, press to highlight the icon, then press OK/ENTER.45Using the DVD equalizer451 While your TV/DVD combo is in DVD mode, press SETUP. The icon is highlighted.452 Press or to highlight (audio), then press OK/ENTER. The AUDIO SETUP PAGE opens.453 Press or to highlight CHANNEL EQUALIZER, then press OK/ENTER. The CHANNEL EQUALIZER PAGE opens.464 Press or to highlight EQ TYPE, then press OK/ENTER.465 Press or to highlight an equalizer pattern, then press OK/ENTER. You can select:466 Press one or more times to go back to the previous menu.467 To close the menu, press to highlight the icon, then press OK/ENTER.46Setting up DVD 3D sound461 While your TV/DVD combo is in DVD mode, press SETUP. The icon is highlighted.462 Press or to highlight (audio), then press OK/ENTER. The AUDIO SETUP PAGE opens.463 Press or to highlight 3D PROCESSING, then press OK/ENTER. The 3D PROCESSING PAGE opens.464 Press or to highlight a setting, then press OK/ENTER. You can select:465 Press or to adjust the setting, then press OK/ENTER.466 Press one or more times to go back to the previous menu.467 To close the menu, press to highlight the icon, then press OK/ENTER.46Setting up DVD video options471 While your TV/DVD combo is in DVD mode, press SETUP. The icon is highlighted.472 Press or to highlight (video), then press OK/ENTER. The VIDEO SETUP PAGE opens.473 Press or to highlight a setting, then press OK/ENTER. You can select:474 Press one or more times to go back to the previous menu.475 To close the menu, press to highlight the icon, then press OK/ENTER.47Using parental controls471 While your TV/DVD combo is in DVD mode, press SETUP. The icon is highlighted.472 Press or to highlight (password), then press OK/ENTER. The PASSWORD SETUP PAGE opens.473 Press or to highlight an option, then press OK/ENTER. You can select:474 Press one or more times to go back to the previous menu.475 To close the menu, press to highlight the icon, then press OK/ENTER.47Changing DVD preferences481 While in DVD mode, make sure that your TV/DVD combo is in stop mode.482 Press SETUP. The icon is highlighted.483 Press or to highlight (preferences), then press OK/ENTER. The PREFERENCES PAGE opens.484 Press or to highlight an option, then press OK/ENTER. You can select:485 Press or to change the option, then press OK/ENTER.486 Press one or more times to go back to the previous menu.487 To close the menu, press to highlight the icon, then press OK/ENTER.48Maintaining49Cleaning the cabinet49Care and handling of discs49Handling discs49Storing discs49Cleaning discs49Troubleshooting49TV49DVD player49Specifications50Legal notices50FCC Part 1550FCC warning50DHHS and FDA safety certification50RSS 310 statement50Macrovision statement50ICES/BETS-7 Statements50Canada ICES-003 statement50How long does the coverage last?51What does this warranty cover?51How to obtain warranty service?51Where is the warranty valid?51What does the warranty not cover?51文件大小: 18.0 MB页数: 56Language: English打开用户手册