用户手册目录1. Introduction91.1 Reader/Controller Types91.2 Box Content101.3 Ancillary Equipment102. Technical Specifications113. Installation133.1 Mounting133.2 Wiring Instructions143.2.1 Wiring the Unit as a Reader143.2.2 Wiring the Unit as a Controller154. Reader Operation184.1 Standby Mode184.2 Programming as a Reader184.2.1 Entering Programming Mode204.2.2 Exiting Programming Mode204.2.3 Selecting Keypad Transmission Format214.2.3.1 Single Key, Wiegand 6-Bit (Rosslare Format)224.2.3.2 Single Key, Wiegand 6-Bit Nibble and Parities224.2.3.3 Single Key, Wiegand 8-Bit Nibbles Complemented224.2.3.4 4 Keys Binary + Facility Code, Wiegand 26-Bit234.2.3.5 1 to 5 Keys + Facility Code, Wiegand 26-Bit234.2.3.6 6 Keys BCD and Parity Bits, Wiegand 26-Bit244.2.3.7 Single Key, 3x4 Matrix Keypad254.2.3.8 1 to 8 Keys BCD, Clock & Data264.2.3.9 Single Key, Wiegand 4-Bit264.2.4 Selecting Proximity Card Transmission Format264.2.4.1 "Wiegand Card + PIN" Transmission Format274.2.5 Changing the Programming Code284.2.6 Changing the Facility Code294.2.7 Setting the Backlight Behavior294.2.8 Return to Factory Default Settings304.2.9 Replacing a Lost Programming Code315. Controller Operation325.1 Normal, Secure, and Master Users325.2 Modes of Operation335.2.1 Normal Mode335.2.2 Bypass Mode335.2.3 Secure Mode345.2.4 Changing the Modes of Operation345.2.4.1 Changing from Normal Mode to Secure Mode345.2.4.2 Changing from Secure Mode to Normal Mode345.2.4.3 Changing from Normal Mode to Bypass Mode355.2.4.4 Changing from Bypass Mode to Normal Mode355.3 Auxiliary Input and Output355.4 Door Alarms355.5 Internal Case and Back Tamper365.6 Lockout Feature (Keypad/Card Tamper)365.7 REX Function365.8 Secured Intelligent Power Supply375.9 Programming as a Controller375.9.1 Entering Programming Mode385.9.2 Exiting Programming Mode395.9.3 Changing Lock Strike Code395.9.4 Changing Auxiliary Code405.9.5 Changing the Programming Code415.9.6 Changing the Normal/Secure Code415.9.7 Changing the Normal/Bypass Code and Door Chime Settings425.9.8 Setting Fail Safe/Secure Operation, Tamper Siren and Lock Strike Release Time435.9.9 Defining the Auxiliary Input and Output445.9.9.1 Auxiliary Mode 0455.9.9.2 Auxiliary Mode 1465.9.9.3 Auxiliary Mode 2465.9.9.4 Auxiliary Mode 3475.9.9.5 Auxiliary Mode 4475.9.9.6 Auxiliary Mode 5475.9.9.7 Auxiliary Mode 6485.9.9.8 Auxiliary Mode 7485.9.9.9 Auxiliary Mode 8485.9.9.10 Auxiliary Mode 9495.9.10 Setting the Lockout Feature495.9.11 Setting the Backlight Behavior505.9.12 Enrolling Primary and Secondary Codes515.9.12.1 Primary Codes515.9.12.2 Secondary Codes515.9.12.3 Enrolling Methods525.9.12.4 Enrolling Primary and Secondary Codes using Standard Method525.9.12.5 Enrolling Secondary Codes using the Code Search Method545.9.13 Deleting Primary and Secondary Codes555.9.13.1 Deleting Primary and Secondary Codes using Standard Method555.9.13.2 Deleting Primary and Secondary Codes using Search Method565.9.14 Relay Codes Assignment575.9.15 Relay Code Assignment using Standard Method575.9.16 Relay Code Assignment using Search Method585.9.17 PIN Code Length/Factory Default Settings595.9.18 Replacing a Lost Programming Code605.9.19 Exiting Secure Mode if Normal/Secure Code was Lost60A. Declaration of Conformity61B. Limited Warranty62文件大小: 890.9 KB页数: 63Language: English打开用户手册