用户手册 — Unitech MR350MKII

目录

• Table of Contents

  1
• System Kernel

  1
• Application Programming Interface

  1
• Keypad Subsystem

  1
• Display Subsystem

  1
• Communication Subsystem

  1
• 1.4.1. Point to point mode

  1
• 1.4.2. Multi-point mode

  1
• Real time clock subsystem

  1
• Relay output and Digital input subsystem

  1
• Bar code / Magnetic stripe / Proximity / ICC

  1
• Download Program in Point-to-point mode

  1
• Download Program in Multi-point mode

  1
• Data Structure

  2
• Device Control Table

  2
• Type Definition

  2
• Barcode Control Table

  2
• 2.3.1. Type Definition

  2
• Communication Control Table of Host port

  2
• 2.4.1. Type Definition

  2
• Terminal Control Table (available for host port only)

  2
• 2.5.1. Type Definition

  2
• I/O Function Calls

  3
• LCD Display INT 10H

  3
• Clear screen

  3
• Set cursor type

  3
• Set cursor position

  3
• Get cursor position

  3
• Scroll screen

  3
• Enable/disable LCD Backlight INT 21H

  3
• Communication Environment Setup

  3
• Select COM1 or COM2 as the host port

  3
• Set host port protocol

  3
• Set serial port flow control

  3
• Set COM1 port as RS485 or modem

  3
• Host Port for Multi-point Protocol I/O (INT21H)

  3
• Setup multi-point address

  3
• Set polling timeout duration

  3
• Read host port

  3
• Output data

  3
• Check if Busy-port

  3
• Serial I/O for RS-232 and RS-485

  3
• RS-232 port serial I/O using INT 34H

  3
• Input data

  3
• Output data

  3
• Enable RS-232 port

  3
• Disable RS-232 port

  3
• Set Communication parameters

  3
• Set RTS signal of RS-232 port

  3
• Read CTS signal of RS-232 port

  3
• RS-485 port serial I/O using INT 33H

  3
• Input data

  3
• Output data

  3
• Enable RS-485 port for serial I/O

  3
• Disable RS-485 port for serial I/O

  3
• Set Communication parameters

  3
• Open RS-485 multi-bus to send out data

  3
• Close RS-485 multi-bus (release RS-485 bus)

  3
• Relay Output / Digit Input / Buzzer / LED Indicator

  3
• Set LED indicator ON/OFF INT 09H

  3
• Read Photo Coupler Level state INT 08H

  3
• Activate/Deactivate Relay ports INT 09H

  3
• Buzzer On/Off INT 21H

  3
• Set buzzer volume INT 21H

  3
• Get Security state INT 21H

  3
• Alarm On/Off INT 21H

  3
• Buzzer volume control with user-defined frequency and time INT 21H

  3
• Buzzer volume control with predefined frequency and time INT 35H

  3
• Internal/ External reader Port: INT 21H

  3
• Enable/Disable External reader port

  3
• Set external slot reader (only available for Barcode and Magnetic reader)

  3
• Read data from external reader(only available for Barcode and Magnetic reader)

  3
• Read Internal port

  3
• Enable/disable Internal reader

  3
• Enable/Disable the Decoder of Wiegand Format (Proximity reader)

  3
• Get Decoder status of Wiegand Format (Proximity reader)

  3
• Assign barcode or magnetic stripe input of Internal reader

  3
• Enable the decoding of a barcode symbology

  3
• Miscellaneous: INT 21H

  3
• Check lithium battery level

  3
• Get Address ID of the terminal

  3
• Set interrupt vector

  3
• Get interrupt vector

  3
• Get free disk cluster

  3
• Invoke supervisor mode

  3
• Change the Keyboard map

  3
• DOS Manager

  3
• Read stdin (wait if no key) and write it to stdout

  3
• Write stdout

  3
• Read stdaux (COM2 RS-232 port)

  3
• Write stdaux (COM2 RS-232 port)

  3
• Read / Write stdin or return 0 if none is ready

  3
• Read stdin (wait if no key)

  3
• Read stdin (wait if no key)

  3
• Write character string to stdout

  3
• Keyboard buffer input

  3
• Keyhit check

  3
• Get System date

  3
• Set System date

  3
• Get System clock

  3
• Set System clock

  3
• File Manager

  3
• Create or truncate file

  3
• Open file

  3
• Close file

  3
• Read file

  3
• Write file

  3
• Delete file

  3
• Move file pointer

  3
• Get file attribute

  3
• Rename a file

  3
• Allocate specified number of paragraphs memory

  3
• Free allocated memory

  3
• Modify allocated block

  3
• Host ESC Commands

  4
• General Control Commands

  4
• Get terminal ID (ESC R)

  4
• This commcand can get terminal ID. The default terminal ID is "MR350"

  4
• Get terminal ID and version no (ESC v)

  4
• Configuration Commands

  4
• File Transfer Commands

  4
• Multipoint Protocol

  4
• 4.4.1. Protocol Operation

  4
• 4.4.2. Commands

  4
• ESC 0 - Application data

  4
• ESC A - Soft Reset, Restart, or Abort

  4
• ESC B - Enable/disable the decoding of barcode symbologies:

  4
• ESC C - Write communication configuration table to MR350MKII

  4
• ESC D - Read directory of RAM disk to host

  4
• ESC D/ROM - Read directory of Flash ROM to host

  4
• ESC E - Erase a file from the MR350MKII directory

  4
• ESC F - Disable UPS battery to supply power

  4
• ESC G - Get MR350MKII's RAM size

  4
• ESC G/ROM - Get MR350MKII's Flash ROM size

  4
• ESC H - Hard Reset and initiate power on test

  4
• ESC I - Get filename of current executing program

  4
• ESC J - Check if file existed or not

  4
• ESC K - Set keyboard locking

  4
• ESC L - Transfer file to MR350MKII

  4
• ESC M - Write date and time to MR350MKII

  4
• ESC O - Set auto-execution program

  4
• ESC P - Set supervisor password (maxi. 8 characters)

  4
• ESC R - Terminal ID

  4
• ESC T - Write terminal configuration table to MR350MKII

  4
• ESC U - Transfer file from MR350MKII

  4
• ESC V - Write device configuration table to MR350MKII

  4
• ESC v - Get Terminal ID and version no

  4
• ESC X - Start program execution

  4
• ESC Commands Added for MV1100 Fingerprint Module

  4
• 4.5.1. Get Template List (ESC $D)

  4
• 4.5.2. Erase Template ( ESC $E)

  4
• 4.5.3. Enroll and Store Template on MR350 MKII ( ESC $F )

  4
• 4.5.4. Enroll and Store Template on MV1100 ( ESC $G )

  4
• 4.5.5. Verify Template ( ESC $H )

  4
• 4.5.6. Verify ID ( ESC $I )

  4
• 4.5.7. Download Template ( ESC $L)

  4
• 4.5.8. Set Globe Threshold ( ESC $S)

  4
• 4.5.9. Get Globe Threshold ( ESC $S)

  4
• Upload Template ( ESC $U)

  4
• Get Version ( ESC $V)

  4
• How to to programming

  5
• Programming MR350 MKII

  5
• 5.1.1. Programming by JobGen PRO

  5
• 5.1.2. Programming by C/C++

  5
• Programming communication program

  5
• Contains of the Demo Disk

  5
• Appendix A. Standard C Libraries Routine for MR350MKII

  5