用户手册 — Whirlpool 2180911

目录

• front cover

  1
• before you start

  2
• tools & materials needed

  2
• parts supplied

  2
• product dimensions

  2
• built-in opening dimensions

  2
• electrical requirements

  3
• water requirements

  3
• drain requirements

  3
• now start

  3
  • 1 - carefully place carton on its side

    3
  • 2 - remove all tape and packing material

    3
  • 3 - remove the lower access panel

    3
  • 4 - turn the fan by hand to check that it moves freely

    3
  • 5 - loosen the thumb screws holding the cutter grid

    3
  • 6 - move ice maker close to final position

    3
  • 7 - plug power supply cord into grounded outlet

    3
  • 8 - insert the cold water supply tube through rear

    3
  • 9 - bend the cold water supply tubing up toward fitting

    3
  • 10 - check that ice maker is level

    3
  • 11 - if the ice maker is installed above 2,000 ft...

    3
  • 12 - change door panels if desired

    4
  • 13 - turn on the water supply and check for leaks

    4
  • 14 - reattach the lower access panel and air grille

    4
  • 15 - check that all parts have been installed

    4
  • 16 - take a few minutes to read your owner's manual

    4
  • 17 - wash out the interior bin with baking soda & water

    4
  • 18 - turn the control knob to the CLEAN position

    4
  • 19 - turn the control knob to ON position

    4
  • 20 - let the ice maker run for three hours

    4
  • 21 - continue to let the ice maker run for 24 hours

    4
• changing the bin door and lower panel

  4
• how your ice maker works

  4
• things to remember

  4
• if the ice maker does not operate

  5
• if you need assistance

  5
• if you need service

  5
• wiring diagram

  5