用户手册目录Welcome to the UX2564Table of contents4SPECIAL NOTICES4UX256 Features5USB5Notes on USB6Package Contents7About the included software7System Requirements8Specifications8Parts and Functions9A ON/STANDBY switch9B POWER LED9C USB LED9D TO TG terminals 1 and 29E MIDI terminals 1-69F USB terminal9G DC IN jack9Connection10(1) Connecting the included power adaptor101. Set the ON/STANDBY switch on the UX256 to off (standby).102. Connect the plug of the power adaptor (PA-3B) to the DC IN jack on the rear panel of the UX256.103. Connect the power adaptor to the appropriate AC outlet.10Connection11(2) Connecting a computer11(3) Connecting the TO TG terminal to a MIDI device11(4) Connecting the MIDI terminals to a MIDI device11Connection12(5) Connecting USB hubs12USB hub12Installing the Driver13Installing the Driver14Installing the driver on a Windows 98 system14Follow the steps below to install the driver.141. Start the computer.142. Make sure that the power to the UX256 is turned off (standby). Connect the USB terminal of the...143. Turn on the power to the UX256. The system displays the “Add New Hardware Wizard.”144. Click [Next]. The system displays a screen that enables you to select search method.14Installing the Driver155. Check the radio button to the left of “Search for the best driver for your device. (Recommende...156. Insert the included CD-ROM into the CD-ROM drive. After making sure that the system recognizes...157. When the system detects the driver in the CD-ROM and is ready for installation, it displays th...15Installing the Driver168. When installation is complete, the following screen appears. Click [Finish].16Checking the installation161. Double-click “System” in the Control Panel to open the System Properties window.162. Click the “Device Manager” tab and check to see if “YAMAHA USB MIDI Driver” is listed.16Installing the Driver17Selecting the destination for the MIDI signal output171. Click “Multimedia” in the Control Panel to open the Multimedia Properties window.172. Click the “MIDI” tab and check to see if “Yamaha USB OUT xx-yy” is listed.173. While “Single instrument” is selected, select a driver according to the port number of the con...17Connecting multiple UX256s171. Start the computer.172. Make sure the power to the UX256s is turned off (standby). Connect the USB terminal of the com...173. Turn on the power to the UX256s.17Installing the Driver18Installing the driver on a Macintosh system181. Start the computer.182. Insert the included CD-ROM into the CD-ROM drive. The system displays the CD-ROM icon on the d...183. Double-click the CD-ROM icon and double-click the “Install OMS 2.3.6” icon in the “OMS” folder.181. Start the computer.182. Insert the included CD-ROM into the CD-ROM drive.183. Double-click the CD-ROM icon and double-click the “Install USB Driver” icon to display the fol...18Installing the Driver194. The “Install Location” box displays the destination of the installation. If you wish to change...195. Click the [Install] button. The system displays the following message: “This installation requ...196. The installation starts. If the driver has already been installed, you will receive the follow...197. When the installation is complete, the system displays the following message: “Installation wa...19Installing the Driver201. Start the computer.202. Make sure that the power to the UX256 is turned off (standby). Then connect the USB terminal o...203. Turn on the power to the UX256. Make sure the red POWER LED and green USB LED on the UX256 lig...204. Open the “OMS Applications” folder in the “Opcode” folder installed on the hard disk, and doub...205. If the AppleTalk dialog appears, click [Turn It Off], then click [OK] in the subsequent dialog...206. The system displays the “Create a New Studio Setup” dialog box. If this dialog box does not ap...20Installing the Driver217. Click [OK]. The system displays the “OMS Driver Search” dialog box. Remove the check from the ...218. After the search operation is complete, make sure that “USB-MIDI 1” is listed in the “OMS Driv...21Installing the Driver229. Make sure that “USB-MIDI 1” and multiple Port numbers are listed in the “OMS MIDI Device Setup...2210. Click [OK].2211. The system displays a dialog box that enables you to save the setup file. Enter the file name...22Installing the Driver2312. After you save the file, the system displays the following window. The setting is complete if...2313. You can also improve the setup view by changing the name and icon for each port. For more inf...23Using 2 or more UX256s23Changing the driver setting (MIDI Patch Screen)24Changing the driver setting (MIDI Patch Screen)25Starting the MIDI Patch screen251. Double-click “Control Panel” in the “My Computer” folder.252. Double-click “MIDI-USB Driver” to display the screen.25Changing the driver setting (MIDI Patch Screen)26Changing the device number26Checking the signal path26Changing the driver setting (MIDI Patch Screen)27Changing the connection during playback (PC OUT Æ MIDI OUT)27Routing MIDI signals from the computer’s output ports 1, 2, and 3 to MIDI OUT 1 on the UX25627Changing the driver setting (MIDI Patch Screen)28Changing the connection during recording (MIDI IN Æ PC IN)28Routing MIDI signals from MIDI IN 2, 3, and 4 on the UX256 to the computer’s input port 128Changing the driver setting (MIDI Patch Screen)29THRU output of MIDI signals (MIDI IN Æ MIDI OUT)29Routing MIDI signals directly from MIDI IN 2 to MIDI OUT 329Troubleshooting (FAQ)30The driver cannot be installed.301. Double-click “System” in the Control Panel to open the System window.302. Double-click the “Device Manager” tab and make sure that no “!” or “x” marks appear at “Univer...301. Double-click “System” in the Control Panel to open the System window.302. Double-click the “Device Manager” tab. With the “View devices by type” check box checked, look...303. If you find “Other devices,” double-click it to extend the tree to look for “Unknown device.” ...304. Remove the USB cable from the UX256, and make the connection again.305. Install the driver by following the steps (starting from Step 3) described on page14.30The UX256 does not operate correctly, or no sound is heard.30Troubleshooting (FAQ)31Playback response is delayed.31Cannot suspend or resume the computer correctly.31How can I remove or re-install the driver?311. When the UX256 is recognized correctly, double-click “System” in the Control Panel to open the...312. Double-click the “Device Manager” tab, select “YAMAHA USB MIDI Driver” and remove it.313. Use MS-DOS prompt or Explorer to remove the following three files.314. Turn off the power to the UX256 and remove the USB cable.315. Restart the computer.316. Re-install the driver according to the instructions on page14.311. Delete the files in the following locations: System Folder | Control Panels | YAMAHA USB MIDI ...312. Re-start the computer.313. Install the driver (page18) and set up OMS (page20).31Wish to use the UX256 in MIDI-supported games.311. Double-click “Multimedia” in the Control Panel.312. Click the “MIDI” tab and select the driver according to the port number of the connected tone ...31Wish to use the UX256 with a Windows NT machine31文件大小: 2.2 MB页数: 34Language: English打开用户手册
用户手册目录Welcome to the UX2564Table of contents4SPECIAL NOTICES4UX256 Features5USB5Notes on USB6Package Contents7About the included software7System Requirements8Specifications8Parts and Functions9A ON/STANDBY switch9B POWER LED9C USB LED9D TO TG terminals 1 and 29E MIDI terminals 1-69F USB terminal9G DC IN jack9Connection10(1) Connecting the included power adaptor101. Set the ON/STANDBY switch on the UX256 to off (standby).102. Connect the plug of the power adaptor (PA-3B) to the DC IN jack on the rear panel of the UX256.103. Connect the power adaptor to the appropriate AC outlet.10Connection11(2) Connecting a computer11(3) Connecting the TO TG terminal to a MIDI device11(4) Connecting the MIDI terminals to a MIDI device11Connection12(5) Connecting USB hubs12USB hub12Installing the Driver13Installing the Driver14Installing the driver on a Windows 98 system14Follow the steps below to install the driver.141. Start the computer.142. Make sure that the power to the UX256 is turned off (standby). Connect the USB terminal of the...143. Turn on the power to the UX256. The system displays the “Add New Hardware Wizard.”144. Click [Next]. The system displays a screen that enables you to select search method.14Installing the Driver155. Check the radio button to the left of “Search for the best driver for your device. (Recommende...156. Insert the included CD-ROM into the CD-ROM drive. After making sure that the system recognizes...157. When the system detects the driver in the CD-ROM and is ready for installation, it displays th...15Installing the Driver168. When installation is complete, the following screen appears. Click [Finish].16Checking the installation161. Double-click “System” in the Control Panel to open the System Properties window.162. Click the “Device Manager” tab and check to see if “YAMAHA USB MIDI Driver” is listed.16Installing the Driver17Selecting the destination for the MIDI signal output171. Click “Multimedia” in the Control Panel to open the Multimedia Properties window.172. Click the “MIDI” tab and check to see if “Yamaha USB OUT xx-yy” is listed.173. While “Single instrument” is selected, select a driver according to the port number of the con...17Connecting multiple UX256s171. Start the computer.172. Make sure the power to the UX256s is turned off (standby). Connect the USB terminal of the com...173. Turn on the power to the UX256s.17Installing the Driver18Installing the driver on a Macintosh system181. Start the computer.182. Insert the included CD-ROM into the CD-ROM drive. The system displays the CD-ROM icon on the d...183. Double-click the CD-ROM icon and double-click the “Install OMS 2.3.6” icon in the “OMS” folder.181. Start the computer.182. Insert the included CD-ROM into the CD-ROM drive.183. Double-click the CD-ROM icon and double-click the “Install USB Driver” icon to display the fol...18Installing the Driver194. The “Install Location” box displays the destination of the installation. If you wish to change...195. Click the [Install] button. The system displays the following message: “This installation requ...196. The installation starts. If the driver has already been installed, you will receive the follow...197. When the installation is complete, the system displays the following message: “Installation wa...19Installing the Driver201. Start the computer.202. Make sure that the power to the UX256 is turned off (standby). Then connect the USB terminal o...203. Turn on the power to the UX256. Make sure the red POWER LED and green USB LED on the UX256 lig...204. Open the “OMS Applications” folder in the “Opcode” folder installed on the hard disk, and doub...205. If the AppleTalk dialog appears, click [Turn It Off], then click [OK] in the subsequent dialog...206. The system displays the “Create a New Studio Setup” dialog box. If this dialog box does not ap...20Installing the Driver217. Click [OK]. The system displays the “OMS Driver Search” dialog box. Remove the check from the ...218. After the search operation is complete, make sure that “USB-MIDI 1” is listed in the “OMS Driv...21Installing the Driver229. Make sure that “USB-MIDI 1” and multiple Port numbers are listed in the “OMS MIDI Device Setup...2210. Click [OK].2211. The system displays a dialog box that enables you to save the setup file. Enter the file name...22Installing the Driver2312. After you save the file, the system displays the following window. The setting is complete if...2313. You can also improve the setup view by changing the name and icon for each port. For more inf...23Using 2 or more UX256s23Changing the driver setting (MIDI Patch Screen)24Changing the driver setting (MIDI Patch Screen)25Starting the MIDI Patch screen251. Double-click “Control Panel” in the “My Computer” folder.252. Double-click “MIDI-USB Driver” to display the screen.25Changing the driver setting (MIDI Patch Screen)26Changing the device number26Checking the signal path26Changing the driver setting (MIDI Patch Screen)27Changing the connection during playback (PC OUT Æ MIDI OUT)27Routing MIDI signals from the computer’s output ports 1, 2, and 3 to MIDI OUT 1 on the UX25627Changing the driver setting (MIDI Patch Screen)28Changing the connection during recording (MIDI IN Æ PC IN)28Routing MIDI signals from MIDI IN 2, 3, and 4 on the UX256 to the computer’s input port 128Changing the driver setting (MIDI Patch Screen)29THRU output of MIDI signals (MIDI IN Æ MIDI OUT)29Routing MIDI signals directly from MIDI IN 2 to MIDI OUT 329Troubleshooting (FAQ)30The driver cannot be installed.301. Double-click “System” in the Control Panel to open the System window.302. Double-click the “Device Manager” tab and make sure that no “!” or “x” marks appear at “Univer...301. Double-click “System” in the Control Panel to open the System window.302. Double-click the “Device Manager” tab. With the “View devices by type” check box checked, look...303. If you find “Other devices,” double-click it to extend the tree to look for “Unknown device.” ...304. Remove the USB cable from the UX256, and make the connection again.305. Install the driver by following the steps (starting from Step 3) described on page14.30The UX256 does not operate correctly, or no sound is heard.30Troubleshooting (FAQ)31Playback response is delayed.31Cannot suspend or resume the computer correctly.31How can I remove or re-install the driver?311. When the UX256 is recognized correctly, double-click “System” in the Control Panel to open the...312. Double-click the “Device Manager” tab, select “YAMAHA USB MIDI Driver” and remove it.313. Use MS-DOS prompt or Explorer to remove the following three files.314. Turn off the power to the UX256 and remove the USB cable.315. Restart the computer.316. Re-install the driver according to the instructions on page14.311. Delete the files in the following locations: System Folder | Control Panels | YAMAHA USB MIDI ...312. Re-start the computer.313. Install the driver (page18) and set up OMS (page20).31Wish to use the UX256 in MIDI-supported games.311. Double-click “Multimedia” in the Control Panel.312. Click the “MIDI” tab and select the driver according to the port number of the connected tone ...31Wish to use the UX256 with a Windows NT machine31文件大小: 2.2 MB页数: 34Language: English打开用户手册
用户手册目录Welcome to the UX2564Table of contents4SPECIAL NOTICES4UX256 Features5USB5Notes on USB6Package Contents7About the included software7System Requirements8Specifications8Parts and Functions9A ON/STANDBY switch9B POWER LED9C USB LED9D TO TG terminals 1 and 29E MIDI terminals 1-69F USB terminal9G DC IN jack9Connection10(1) Connecting the included power adaptor101. Set the ON/STANDBY switch on the UX256 to off (standby).102. Connect the plug of the power adaptor (PA-3B) to the DC IN jack on the rear panel of the UX256.103. Connect the power adaptor to the appropriate AC outlet.10Connection11(2) Connecting a computer11(3) Connecting the TO TG terminal to a MIDI device11(4) Connecting the MIDI terminals to a MIDI device11Connection12(5) Connecting USB hubs12USB hub12Installing the Driver13Installing the Driver14Installing the driver on a Windows 98 system14Follow the steps below to install the driver.141. Start the computer.142. Make sure that the power to the UX256 is turned off (standby). Connect the USB terminal of the...143. Turn on the power to the UX256. The system displays the “Add New Hardware Wizard.”144. Click [Next]. The system displays a screen that enables you to select search method.14Installing the Driver155. Check the radio button to the left of “Search for the best driver for your device. (Recommende...156. Insert the included CD-ROM into the CD-ROM drive. After making sure that the system recognizes...157. When the system detects the driver in the CD-ROM and is ready for installation, it displays th...15Installing the Driver168. When installation is complete, the following screen appears. Click [Finish].16Checking the installation161. Double-click “System” in the Control Panel to open the System Properties window.162. Click the “Device Manager” tab and check to see if “YAMAHA USB MIDI Driver” is listed.16Installing the Driver17Selecting the destination for the MIDI signal output171. Click “Multimedia” in the Control Panel to open the Multimedia Properties window.172. Click the “MIDI” tab and check to see if “Yamaha USB OUT xx-yy” is listed.173. While “Single instrument” is selected, select a driver according to the port number of the con...17Connecting multiple UX256s171. Start the computer.172. Make sure the power to the UX256s is turned off (standby). Connect the USB terminal of the com...173. Turn on the power to the UX256s.17Installing the Driver18Installing the driver on a Macintosh system181. Start the computer.182. Insert the included CD-ROM into the CD-ROM drive. The system displays the CD-ROM icon on the d...183. Double-click the CD-ROM icon and double-click the “Install OMS 2.3.6” icon in the “OMS” folder.181. Start the computer.182. Insert the included CD-ROM into the CD-ROM drive.183. Double-click the CD-ROM icon and double-click the “Install USB Driver” icon to display the fol...18Installing the Driver194. The “Install Location” box displays the destination of the installation. If you wish to change...195. Click the [Install] button. The system displays the following message: “This installation requ...196. The installation starts. If the driver has already been installed, you will receive the follow...197. When the installation is complete, the system displays the following message: “Installation wa...19Installing the Driver201. Start the computer.202. Make sure that the power to the UX256 is turned off (standby). Then connect the USB terminal o...203. Turn on the power to the UX256. Make sure the red POWER LED and green USB LED on the UX256 lig...204. Open the “OMS Applications” folder in the “Opcode” folder installed on the hard disk, and doub...205. If the AppleTalk dialog appears, click [Turn It Off], then click [OK] in the subsequent dialog...206. The system displays the “Create a New Studio Setup” dialog box. If this dialog box does not ap...20Installing the Driver217. Click [OK]. The system displays the “OMS Driver Search” dialog box. Remove the check from the ...218. After the search operation is complete, make sure that “USB-MIDI 1” is listed in the “OMS Driv...21Installing the Driver229. Make sure that “USB-MIDI 1” and multiple Port numbers are listed in the “OMS MIDI Device Setup...2210. Click [OK].2211. The system displays a dialog box that enables you to save the setup file. Enter the file name...22Installing the Driver2312. After you save the file, the system displays the following window. The setting is complete if...2313. You can also improve the setup view by changing the name and icon for each port. For more inf...23Using 2 or more UX256s23Changing the driver setting (MIDI Patch Screen)24Changing the driver setting (MIDI Patch Screen)25Starting the MIDI Patch screen251. Double-click “Control Panel” in the “My Computer” folder.252. Double-click “MIDI-USB Driver” to display the screen.25Changing the driver setting (MIDI Patch Screen)26Changing the device number26Checking the signal path26Changing the driver setting (MIDI Patch Screen)27Changing the connection during playback (PC OUT Æ MIDI OUT)27Routing MIDI signals from the computer’s output ports 1, 2, and 3 to MIDI OUT 1 on the UX25627Changing the driver setting (MIDI Patch Screen)28Changing the connection during recording (MIDI IN Æ PC IN)28Routing MIDI signals from MIDI IN 2, 3, and 4 on the UX256 to the computer’s input port 128Changing the driver setting (MIDI Patch Screen)29THRU output of MIDI signals (MIDI IN Æ MIDI OUT)29Routing MIDI signals directly from MIDI IN 2 to MIDI OUT 329Troubleshooting (FAQ)30The driver cannot be installed.301. Double-click “System” in the Control Panel to open the System window.302. Double-click the “Device Manager” tab and make sure that no “!” or “x” marks appear at “Univer...301. Double-click “System” in the Control Panel to open the System window.302. Double-click the “Device Manager” tab. With the “View devices by type” check box checked, look...303. If you find “Other devices,” double-click it to extend the tree to look for “Unknown device.” ...304. Remove the USB cable from the UX256, and make the connection again.305. Install the driver by following the steps (starting from Step 3) described on page14.30The UX256 does not operate correctly, or no sound is heard.30Troubleshooting (FAQ)31Playback response is delayed.31Cannot suspend or resume the computer correctly.31How can I remove or re-install the driver?311. When the UX256 is recognized correctly, double-click “System” in the Control Panel to open the...312. Double-click the “Device Manager” tab, select “YAMAHA USB MIDI Driver” and remove it.313. Use MS-DOS prompt or Explorer to remove the following three files.314. Turn off the power to the UX256 and remove the USB cable.315. Restart the computer.316. Re-install the driver according to the instructions on page14.311. Delete the files in the following locations: System Folder | Control Panels | YAMAHA USB MIDI ...312. Re-start the computer.313. Install the driver (page18) and set up OMS (page20).31Wish to use the UX256 in MIDI-supported games.311. Double-click “Multimedia” in the Control Panel.312. Click the “MIDI” tab and select the driver according to the port number of the connected tone ...31Wish to use the UX256 with a Windows NT machine31文件大小: 2.2 MB页数: 34Language: English打开用户手册