Samsung DV438. Benutzerhandbuch

3

Continuous Run Mode:

. Press Signal + Dry Level for 3 sec during Power On State (Normal User Mode) .

2. Once in Continuous Run Mode, 7-Segment will toggle display “total cycle” and the remain-

ing time.

3. The previous cycle will restart during Continuous Run Mode until continuous run mode is

  disabled.

4. During Continuous Run Mode, press Signal + Dryness Level for 3 seconds to return 

to normal user mode. 7-segment will no long display “total cycle ” and only display the 

remaining time.

Special Test Mode
Definition of Special Test Mode:

-   Dryer must be on before Service Mode can be entered.

-   Press Signal and Temp Keys for 3 seconds, or until 3 beeps are heard.

-   The machine will now be in Service Mode.

-   Upon entry into Service Mode, the Sensor Bar Touch Data will be shown 

  (Default Special Test Mode).

How to Enter:

-   To enter Special Test Mode press Signal and Temp Keys for 3 seconds for 3 seconds or 

  until the control beep.

To avoid risk of electrical shock, personal injury or death; disconnect power to dryer 

before servicing, unless testing requires power.

ALIGNMENT AND ADJUSTMENTS

Technical_information-02365B.ind3   3

2008-06-25   ¿ÀÈÄ 5:24:23