Samsung HTH5500W Benutzerhandbuch

 - English

Connections

1.  Turn the Stand Base upside-down and 

connect it to the Stand.

2.  Use the driver to combine the screws on the  

3 marked holes.

3.  Straighten a supplied speaker wire to the 

gravity direction and put in the hole on the 
centre of Stand Base.

4.  Connect the upper Speaker to the assembled 

Stand.

5.  Insert a screw clockwise into the hole on the 

rear of the speaker using a screwdriver.  
And then connect a speaker cable.

6.  This is the appearance after the speaker is 

installed. 
Follow this steps to install other speaker.

2

4

1

3

5

6

1.  Match each speaker cable bundle to the correct speaker by matching the colour coded plug on each 

bundle to the coloured sticker on the bottom of each speaker.

2.  Connect the speaker wire plugs from each speaker to the back of the product by matching the colours of 

the speaker plugs to the colours of the speaker jacks.