Hoover S3621 Benutzerhandbuch

To obtain approved HOOVER service and
genuine HOOVER parts, locate the near-
est

by:

• checking the Yellow Pages 
under “Vacuum Cleaners - 
Household” OR -

• checking the list of Factory 
Service Centers provided 
with this cleaner OR -

• checking the Service section of 
The Hoover Company online at 

OR -

• calling 

for an 

automated referral of authorized 
service outlet locations (U.S. only).

Please do not send your cleaner to The
Hoover Company in North Canton for ser-
vice, this will only result in delay.

If further assistance is needed, contact
The Hoover Company Consumer
Response Center, North Canton, Ohio
44720, Phone:  330-499-9499.

In Canada, contact Hoover Canada,
Burlington, Ontario L7R 4A8, Phone:  
1-800-263-6376.

Always identify your cleaner by the 

model number when requesting

information or ordering parts.  (The model
number appears on the bottom of the
cleaner.)

The motor is equipped with two bear-
ings that contain sufficient lubrication for
the life of the motor.  The addition of
lubricant could cause damage.

The agitator brush roll is equipped with
two ball bearings  that should be lubri-
cated periodically by a Hoover Factory
Service Center or an authorized Hoover
Warranty Service Dealer (Depot). 

The powered hand tool belt is designed
to last a long time and is not normally
replaced. However, if the belt is
cracked, gouged or broken, it should be
replaced.

The belt can be seen through the top of
the nozzle or by removing the bottom
plate and belt guard (Figs. 3-21 and 3-
22).

2. Grasp turbine (E) and pull firmly to
remove.
3. Remove belt from turbine pulley (F).
Replace with new belt.

When replacing belt, ask for HOOVER

1. Remove bottom plate, belt guard and
brush roll as described in Figs. 3-21
through 3-23.

4. With flat sides of turbine retainers (G)
pointing down, slide retainers into
grooves (H) on both sides of tool hous-
ing and snap into place.
5. Replace brush roll, belt guard, and
bottom plate as described in Figs. 3-23
through 3-26.