Honeywell EN2Z-0906GE51 R0708 Benutzerhandbuch

EN2Z-0906GE51 R0708 

60 

 

Hayes AT command set. 

Security Settings page of iLON 10 

Allow HTTP Access 

- 

Has to be enabled to allow configuration 

changes. 

HTTP Access -> User Name 

iLON 10 Settings -> User Name 

Used to authenticate ARENA when it 

tries to do configuration changes on the 
iLON 10. 

HTTP Access -> Password 

iLON 10 Settings -> Password 

Used to authenticate ARENA when it 

tries to do configuration changes on the 
iLON 10. 

Enable Ethernet Connections 

- 

Has to be enabled for LAN connections 

and disabled for Dial-up connections.  

Use PPP as dial backup when 

Ethernet link fails 

- 

Has to be enabled in case of Dial-Up. If 

this setting is unchecked, a dial-out is 
never initiated from iLON 10. 

Enable Outbound PPP Calls 

- 

Has to be enabled in case of Dial-Up. If 

this setting is unchecked, a dial-out is 
never initiated from iLON 10. 

Number of retries for outbound PPP 

connections 

- 

This is the number of Dial-Out attempts 

the iLON 10 makes in case of an alarm 

when the ARENA cannot be reached. 

The controller will initiate redialing after 5 

minutes waiting time. Usually set to 0, 

because the PANTHER controller does 
the alarm repeat.  

Use PAP (after CHAP fails) 

- 

Authentication mechanism to be used 

when connecting to a PC via a modem. 
Must be enabled. 

Allow and authenticate incoming PPP 

connections 

- 

Must be enabled in case of Dial-Up. 

Otherwise, the supervisor PC (ARENA) 
cannot contact the iLON 10. 

User Name (for incoming PPP 

connections) 

Outgoing Connection -> User Name 

Used to authenticate supervisor PC 

(ARENA) when it tries to contact the 
iLON 10 for configuration purpose. 

Password (for incoming PPP 

connections) 

Outgoing Connection -> Password 

Used to authenticate supervisor PC 

(ARENA) when it tries to contact the 
iLON 10 for access to controller data 

Answer phone after X rings 

- 

Number of rings the iLON 10 modem 

waits until it takes a call from the outside. 

ARENA sets this value to 1 for fastest 

connect time. 

 

 

1. Show 

 as described in the “Show Sites Overview” section. 

2.  For the site you want to edit, click Details button or click on site name in the 

column. The Site <name of the site> displays showing the site´s 

details.