Honeywell THM5421C1008 Benutzerhandbuch

Seite von 40
VISIONPRO
®
 IAQ TOTAL HOME COMFORT SYSTEM
68-0287—1
30
If you don’t have a dehumidifier, the thermostat activates the 
air conditioner to reduce humidity (may cool as much as 3°F 
lower than your temperature setting).
1. Press MORE until the dehumidifier screen is displayed.
2. Press the Up or Down arrow to set the desired humidity 
level and operation (Auto or Off).
3. Press DONE to save and exit, or press CANCEL to exit 
without saving changes.
Ventilation Control
You can ventilate your home at any time:
1. Press MORE until the ventilation screen is displayed.
2. Press the Up or Down arrow to set the ventilation timer. 
You can set the timer to ventilate from 20 to 180 minutes, 
in 20-minute increments. To turn off the ventilator, select 
0.
3. Press DONE to save and exit, or press CANCEL to exit 
without saving changes.
If programmed for auto-ventilation by the installer, the 
thermostat will ventilate your home as needed.
Indoor Air Quality Reminders
Filter Change Reminder
The filter change reminder must be turned on from the Installer 
Setup. Once expired, the screen flashes, “Change Filter” and a 
Reset key appears. Press the Reset key to reset the change 
reminder. The installer can configure the Filter Change 
Reminder to display remaining run-time or calendar days.
NOTE: When using run-time days, the days are counted as 
fan run time, so anytime the fan is running, the 
reminder is counting that time against the number of 
days selected.
The remaining days can be viewed by pressing the More key; 
the remaining days can be edited using the More key or from 
the Installer Setup. To view or reset the reminder before it 
expires, follow these steps using the More key:
1. Press the More key until the filter reminder appears on 
the screen. This is the number of fan run-time or calen-
dar days remaining on the filter reminder.
2. Press the Edit key.
3. Use the Up and Down keys to change the number of run-
time or calendar days.
4. Press the Done key to go back to the viewing screen.
SCHED
HOLD
CLOCK SCREEN
MORE
MON
MON
TUE
WED
WED
THU
THU
FRI
FRI
SSAA
SUN
PM
FAN
AUTO
SYSTEM
HEAT
HEAT
COOL
RESET
CHANGE
 
FILTER
 UV LAMP HUMIDIFIER PAD
Following
Schedule
Inside
Set To
OK TO PICK MULTIPLE DAYS    SCREEN LOCKED
M23511
Humidity
SCHED
SCHED
HOLD
HOLD
CLOCK SCREEN
MORE
DONE
WAKE
LEAVE RETURN SLEEP
EDIT
CANCEL
MON
TUE
WED
THU
FRI
SAT
SUN
RESET
CHANGE 
FILTER
 UV LAMP HUMIDIFIER PAD
DAYS
M22449
SCHED
SCHED
HOLD
HOLD
CLOCK SCREEN
DONE
WAKE
LEAVE RETURN SLEEP
CANCEL
MON
TUE
WED
THU
FRI
SAT
SUN
CHANGE 
FILTER
 UV LAMP HUMIDIFIER PAD
DAYS
M22450
SCHED
SCHED
HOLD
HOLD
CLOCK SCREEN
MORE
DONE
WAKE
LEAVE RETURN SLEEP
EDIT
CANCEL
MON
TUE
WED
THU
FRI
SAT
SUN
RESET
CHANGE 
FILTER
 UV LAMP HUMIDIFIER PAD
DAYS
M22449