Husqvarna T536 Benutzerhandbuch

English

 –

 23

•

Before inserting the battery into the machine, always 
check to see that the power trigger actuates properly 
and returnes to the ”OFF” position when released. To 
prevent the power trigger from being accidentally 
pulled, a power trigger lockout is provided. 

•

Never start a chain saw unless the bar, chain and all 
covers are fitted correctly. See instructions under the 
heading Assembly.

•

Observe your surroundings and make sure that there 
is no risk of people or animals coming into contact with 
the cutting equipment.

•

Always hold the saw with both hands. The right hand 
should be on the top handle, and the left hand on the 
front handle. All people, whether right or left handed, 
should use this grip. Use a firm grip with thumbs and 
fingers encircling the chain saw handles.

•

Insert the battery in the machine. The battery should 
slide easily into the battery holder on the machine. If 
the battery does not slide in easily, it is not being 
inserted correctly.

•

Press on the lower part of the battery and push it in as 
far as it will go into the battery compartment. Make 
sure the latches snap in place properly.

•

Press and hold the start button (>1 sec.) until the 
green LED is lit.