Husqvarna T536 Benutzerhandbuch

22 – English

•

The contained lithium-ion-batteries are subject to the 
Dangerous Goods Legislation requirements.

•

For commercial transports e.g. by third parties, 
forwarding agents, special requirement on packing 
and labeling must be observed.

•

For preparation of the item being shipped, consulting 
an expert for hazardous material is required. Please 
also observe possibly more detailed national 
regulations.

•

Tape or mask off open contacts and pack up the 
batteriy in such a manner that it cannot move around 
in the packing.

•

Always remove the battery for storage or transport.

•

Store the battery and the battery charger in a dry, 
moisture-free and frost-free space.

•

Do not store the battery in places where static 
electricity can occur. Never store the battery in a metal 
box.

•

Store the battery and the battery charger where the 
temperature is between 5 

°C and 45 °C and never in 

direct sunlight.

•

Store the battery charger only in an enclosed and dry 
space.

•

Be sure to store the battery separate from the battery 
charger. Store the equipment in a lockable area so 
that it is out of reach of children and unauthorized 
persons.

•

Ensure the machine is cleaned and that a complete 
service is carried out before long-term storage.

•

The guide bar cover must always be fitted to the 
cutting attachment when the machine is being 
transported or in storage, in order to prevent accident 
contact with the sharp chain. Even a non-moving 
chain can cause serious cuts to yourself or persons 
you bump into with an exposed chain.

•

Secure the machine during transport.

Symbols on the product or its packaging indicate that this 
product cannot be handled as domestic waste. It must 
instead be submitted to an appropriate recycling station 
for the recovery of electrical and electronic equipment.

By ensuring that this product is taken care of correctly, you 
can help to counteract the potential negative impact on 
the environment and people that can otherwise result 
through the incorrect waste management of this product. 
For more detailed information about recycling this 
product, contact your municipality, your domestic waste 
service or the shop from where you purchased the 
product.

LED 1 flashes

The battery is 0%-
25% charged.

LED 1 is lit, LED 2 flashes.

The battery is 25%-
50% charged.

LED 1, LED 2 are lit, LED 3 flashes

The battery is 50%-
75% charged.

LED 1, LED 2, LED 3 are lit, LED 4 
flashes

Battery is 75%-
100% charged

LED 1, LED 2, LED 3, LED 4 are lit.

When all the LEDs 
are lit on the battery, 
it is fully charged.