Husqvarna T536 Benutzerhandbuch

English – 37

The following is a list of the maintenance steps that must be performed on the machine. Most of the items are described 
in the Maintenance section.

Clean the outside of the machine.

File off any burrs from the edges of 
the bar.

Check the connections between the 
battery and the machine and also 
check the connection between battery 
and the battery charger.

Check that the components of the 
power trigger work safely. (Power 
trigger lockout and power trigger.)

Empty the oil tank and clean the 
inside.

Clean the chain brake and check that 
it operates safely. Make sure that the 
chain catcher is undamaged, and 
replace it if necessary.

Blow through the product and battery 
cooling slots gently with compressed 
air.

The bar should be turned daily for 
more even wear. Check the 
lubrication hole in the bar, to be sure it 
is not clogged. Clean the bar groove. 
If the bar has a sprocket tip, this 
should be lubricated.

Check that the bar and chain are 
getting sufficient oil.

Check the saw chain with regard to 
visible cracks in the rivets and links, 
whether the saw chain is stiff or 
whether the rivets and links are 
abnormally worn. Replace if 
necessary.

Sharpen the chain and check its 
tension and condition. Check the drive 
sprocket for excessive wear and 
replace if necessary.

Clean the machines air inlet.

Check that nuts and screws are tight.

Check that the keypad works correctly 
and is not damaged.