Husqvarna T536 Benutzerhandbuch

38 – English

Possible fault codes on the chain saw keypad.

Troubleshooting the battery and/or the battery charger during charging.

Warning indicator flashing.

Chain brake engaged.

Pull back the front hand guard to 
release the chain brake.

Temperature deviation

Allow the machine to cool down.

Overload.

The cutting attachment is jammed. 
Release the cutting attachment. 

The power trigger and the 
activate button are pressed at 
the same time.

Release the power trigger and the 
machine is active.

Green activate LED flashing.

Low battery voltage.

Charge the battery.

Warning indicator lit.

Service

Contact your service agent.

Warning indicator flashing.

The battery is discharged.

Charge the battery

Temperature deviation

Use the battery in surroundings 
where temperatures are between  
-10 

°C and 40 °C.

Over voltage

Check that the mains voltage 
corresponds with that stated on the 
rating plate on the machine.

Remove the battery from the 
battery charger.

Warning indicator lit.

Cell difference too much (1V)

Contact your service agent.

Warning indicator flashing.

Temperature deviation

Use the battery charger only when 
the surrounding temperature is 
between 5 

°C and 40 °C.

Warning indicator lit.

Contact your service agent.