Fujitsu PG-LND101 Benutzerhandbuch
Appendix A
75
E
Appendix A
A.1
Setting Local Address
Perform the following procedures to set a local address.
1
Log on with administrator privileges.
2
Click [Start] → [Settings] → [Control Panel] → [Intel®PROSet
Wired], and start Intel
Wired], and start Intel
®
PROSet.
3
Select a LAN adapter to set the local address and click the
[Advanced] tab.
[Advanced] tab.
4
Specify a local address to set the value in [Locally Administered
Address].
Address].
Enter hexadecimal 12-digit number starting with "02".
5
Click [OK] and exit Intel
®
PROSet.
6
Restart the system.
`
When returning to a global address, delete the value specified in step 4.
A.2
Jumbo Frame
Gigabit Ethernet supports Jumbo Frame. When using Jumbo frame, construct the Jumbo frame
network using only devices that support Jumbo frame, and apply the settings that will enable Jumbo
frame.
network using only devices that support Jumbo frame, and apply the settings that will enable Jumbo
frame.
1
Log on with administrator privileges.
2
Click [Start] → [Settings] → [Control Panel] → [Intel
®
PROSet
Wired], and start Intel
®
PROSet.
3
Select LAN adapter to set and click [Advanced] tab.
4
Specify the value to use in [Jumbo Frames].
5
Click [OK] and exit Intel
®
PROSet.
6
Restart the system.