Agilent Technologies DC122 Benutzerhandbuch
1.10. Transport & Shipping
CAUTION:
Cards can be safely transported in their original shipping packages. DC cards can be transported
when properly mounted in a CompactPCI crate.
To package the instrument for shipping:
Step Notes
1. Place the instrument in its original packaging
materials.
materials.
• If the original packaging materials are not available,
use a professional packaging service. Contact your
Agilent Service Center for more information.
use a professional packaging service. Contact your
Agilent Service Center for more information.
2. Surround the instrument with at least 3 to 4 inches (8
to 10 cm) of its original packing material or bubble-pack
to prevent the instrument from moving in its shipping
container.
to 10 cm) of its original packing material or bubble-pack
to prevent the instrument from moving in its shipping
container.
3. After wrapping it with packing material, place the
instrument in its original shipping container or a strong
shipping container that is made of double-walled
corrugated cardboard with 159 kg (350 lb) bursting
strength.
instrument in its original shipping container or a strong
shipping container that is made of double-walled
corrugated cardboard with 159 kg (350 lb) bursting
strength.
• The shipping container must be large and strong
enough to accommodate your instrument and allow at
least 3 to 4 inches (8 to 10 cm) on all sides for packing
material.
enough to accommodate your instrument and allow at
least 3 to 4 inches (8 to 10 cm) on all sides for packing
material.
4. Seal the shipping container securely with strong nylon
adhesive tape.
adhesive tape.
5. Mark the shipping container “FRAGILE, HANDLE
WITH CARE” to help ensure careful handling.
WITH CARE” to help ensure careful handling.
6. Use the address obtained from your Agilent
Technologies Service Center.
Technologies Service Center.
7. Retain copies of all shipping papers.
CAUTION:
Damage can result if the original packaging materials are not used. Packaging materials should be
anti-static and cushion the instrument on all sides. NEVER USE STYRENE PELLETS IN ANY SHAPE AS
PACKAGING MATERIALS. They do not adequately cushion the instrument or prevent it from moving in the
shipping container. Styrene pellets can also cause equipment damage by generating static electricity or by lodging
in fan motors.
PACKAGING MATERIALS. They do not adequately cushion the instrument or prevent it from moving in the
shipping container. Styrene pellets can also cause equipment damage by generating static electricity or by lodging
in fan motors.
1.11. Maintenance
The cards do not require any maintenance. There are no user serviceable parts inside. A periodic calibration can be
obtained on request.
obtained on request.
1.12. Cleaning
Cleaning procedures consist only of exterior cleaning.
Clean the exterior surfaces of the module with a dry lint-free cloth or a soft-bristle brush. If any dirt remains, wipe
with a cloth moistened in a mild soap solution. Remove any soap residue by wiping with a cloth moistened with clear
water. Do not use abrasive compounds on any parts.
with a cloth moistened in a mild soap solution. Remove any soap residue by wiping with a cloth moistened with clear
water. Do not use abrasive compounds on any parts.
1.13. Disposal and Recycling
Electronic equipment should be properly disposed of. Acqiris Digitizers and their accessories must not be thrown out
as normal waste. Separate collection is appropriate and may be required by law.
as normal waste. Separate collection is appropriate and may be required by law.
User Manual: Family of 10-bit Digitizers
Page 8 of 55