TP-LINK TD-W8960N Benutzerhandbuch

25 

 

Figure 4-14 

¾

  Remove All: Click Remove All, then all the interface will be deleted in the table. 

¾

  Remove: Select the check box in the table above and then click Remove, the corresponding 

interface will be deleted in the table. 

If your ISP provides an IPoE connection and you need to use an ATM Interface, follow the steps 
below to add a WAN service over a selected ATM interface: 

1. Add 

a 

new ATM interface and select EoA option for DSL Link Type (

2. Click 

the 

Add button on the screen (as shown Figure 4-7). Select WAN Service Interface over 

ATM PVC on the next screen (as shown Figure 4-8). 

3.  If your ISP provides an IPoE connection, select IPoE option for the WAN service type on the 

screen (as shown Figure 4-9), and click Next button to continue. 

4.  Enter parameters in the following blanks to configure the WAN IP Address and click Next. 

 

Figure 4-15 

¾

  Obtain an IP address automatically: Select this option, the Router will be able to obtain IP 

network information dynamically from a DHCP server provided by your ISP.