TP-LINK TD-W8960N Benutzerhandbuch

48 

¾

 

Destination IP Address: The Destination IP Address is the address of the network or host 
that you want to assign to a static route. 

¾

 

Interface: Select the Interface name in the text box, or else, the default Use Interface will be 
adopted for the Static Route. 

¾

 

Gateway IP Address:    If you select the IPoE or IPoA mode for Interface, the screen above 
will display this item, you should type the Gateway address correctly, and the other option for 
Interface will adopt the default Gateway address for the Static Route.   

3. Click 

Save/Apply to and then you will see you settings as shown in Figure 4-51. 

1. Select 

the 

Remove check box according to the entry in the Figure 4-51. 

2. Click 

the 

Remove button, and the entry will be deleted. 

)

Gateway IP address should be correctly configure

d if IP based Interface (IPoE, IPoA) i

s selected. 

Choose “Advanced Setup”Æ“Routing”Æ“RIP”, you can see the RIP (Routing Information 
Protocol) screen which allows you to configure the RIP (shown in Figure 4-53). 

 

Figure 4-53 

)

RIP cannot be configured on the WAN Interface which has NAT enabled (such as PPPoE). 

To activate RIP for the device, configure an individual interface, select the desired RIP version and 
operation, and select Enabled checkbox for the interface. 

Click Save/Apply to save the configuration. 

When you select the connection type PPPoE, PPPoA or IPoA for WAN configuration, you will see 
the DNS menu in the Web-based Utility (shown in Figure 4-54). It includes DNS Server and 
Dynamic DNS submenus.